Chimera V2 Top Coat
키메라 V2 탑 코트
Chimera V2 is a hydrophobic polymeric coating that works either as a stand-alone paint sealant or as a top coat applied over Garage Therapy ceramic coatings. It boosts gloss, slickness and self-cleaning properties while strengthening chemical protection and water-spot resistance, with up to about 1 year of protection. The V2 version brings measurable gains in durability, surface slickness and hydrophobic performance over the original.
키메라 V2는 단독 페인트 실란트로 사용하거나 가라지 테라피 세라믹 코팅 위에 탑 코트로 올릴 수 있는 하이드로포빅 폴리머릭 코팅입니다. 광택, 슬릭함, 자기 세정 효과를 높이는 동시에 화학 보호력과 워터스팟 저항성을 강화하며, 최대 약 1년의 보호 효과를 제공합니다. V2 버전은 내구성, 슬릭함, 하이드로포빅 성능이 기존보다 향상되었습니다.
- Brand
- Garage Therapy
- Categories
- Exterior : Glass Sealant, Exterior : Coating
Key features
- Up to about 1 year of protection
- Use as a stand-alone sealant or ceramic top coat
- Strong gloss and surface slickness
- Highly hydrophobic finish
- UV resistance
- Salt resistance
- Oil repellency
- V2: improved durability, slickness and hydrophobic performance
Usage
- Apply only to suitable surfaces: painted bodywork, motorbikes, hard plastic parts, headlights, taillights and alloy wheel rims.
- Avoid applying to aftermarket paint for 2–3 months as a precaution, and do not use on low-quality paint, glass, textiles, tyres or soft trims.
- Wear the included protective gloves and fit a fresh suede cloth to the supplied applicator block; use the glass pipette to dispense the product.
- Apply a small amount of Chimera V2 to the suede and work it into the surface in straight, overlapping passes, one panel at a time.
- Allow the coating to flash off, then buff away residue with a clean microfibre cloth until the surface is fully smooth.
핵심 특징
- 최대 약 1년 보호 효과
- 단독 실란트 또는 세라믹 탑 코트로 활용
- 강한 광택과 슬릭한 표면감
- 높은 하이드로포빅 마감
- UV 저항성
- 염분 저항성
- 오일 발수성
- V2: 내구성·슬릭함·하이드로포빅 성능 향상
사용법
- 도장 바디워크, 모터사이클, 경질 플라스틱, 헤드라이트, 테일라이트, 알로이 휠 림 등 적합한 표면에만 도포합니다.
- 애프터마켓 도장 시공 후 2~3개월간은 사용을 삼가고, 저품질 도장·유리·직물·타이어·소프트 트림에는 사용하지 않습니다.
- 보호 장갑을 착용하고, 어플리케이터 블록에 새 스웨이드를 장착한 뒤 글라스 피펫으로 제품량을 조절합니다.
- 스웨이드에 키메라 V2를 소량 취하고 패널별로 직선의 겹치기 방식으로 도포합니다.
- 코팅이 플래시되면 깨끗한 마이크로파이버 클로스로 잔여물을 닦아 표면을 매끄럽게 마무리합니다.