Resin Protection

레진 프로텍션

A hard-curing coating agent formulated specifically for unpainted plastic trim surfaces such as fenders, bumpers, and moldings. The standard type prioritizes ease of leveling and application, making it less prone to uneven application than the high-retention variant and suitable for multiple layered applications. Designed as a genuine unpainted-resin-exclusive product rather than a repurposed paint-surface coating.

펜더, 범퍼, 몰딩 등 미도장 수지 부위 전용으로 제작된 경화계 코팅제의 스탠다드 타입입니다. 레벨링(평탄화) 성능과 도포 편의성을 우선시하여 얼룩이 덜 생기며, 복수 회 시공으로 성분 잔류량과 광택을 조절하는 방식에 적합합니다. 도장면용 코팅제를 유용한 것이 아닌, 미도장 수지 전용으로 처음부터 설계된 제품입니다.

Brand
Ganbass
Categories
Exterior : Coating

Key features

Usage

  1. Wash the surface in advance — for unpainted resin, use a degreasing shampoo rather than solvent-based degreasers; remove any scale with REBOOT first.
  2. Ensure the surface is completely dry before application.
  3. Apply a suitable amount of product to a small cut microfiber cloth or trimmed applicator sponge.
  4. Working in small sections, spread the product evenly, then immediately wipe off excess with a separate microfiber cloth.
  5. A second coat can be applied after approximately 2 hours if additional protection or gloss is desired.
  6. Avoid wetting or touching the surface for about 2 hours after application.

핵심 특징

  • 미도장 플라스틱 트림 전용 경화계 코팅
  • 원시 잔류량보다 레벨링과 도포 편의성 우선
  • 고잔류 타입보다 얼룩 발생 위험 낮음
  • 복수 회 시공으로 광택 및 보호 수준 조절 가능
  • 신차 및 경미한 노후 차량에 적합

사용법

  1. 사전에 세차하세요 — 미도장 수지의 경우 용제계 탈지제 대신 탈지 샴푸를 사용하고, 스케일이 있는 경우 먼저 REBOOT로 제거하세요.
  2. 시공 전 도장면이 완전히 건조되었는지 확인하세요.
  3. 잘라낸 마이크로파이버 클로스나 타이어용 도포 스펀지에 적당량의 제품을 묻히세요.
  4. 소면적씩 나누어 균일하게 도포한 후 즉시 별도의 마이크로파이버 클로스로 여분을 닦아내세요.
  5. 추가 보호력이나 광택이 필요한 경우 약 2시간 후에 2차 코팅을 실시하세요.
  6. 시공 후 약 2시간 동안은 가능한 한 물에 적시거나 손으로 만지지 마세요.

Also known as: 간바스, ganbas, Ganbass Resin Protection, 간바스 레진 프로텍션

한국어로 보기

Sources