Kenmazai Jokyo Senzai
연마제 잔류 제거 세정제
A dedicated cleaner formulated to remove compound and additive residues left on the paint surface after polishing, compatible with both oil-based and water-based compounds. Its degreasing capability allows direct coating application after use without an additional wash step. Thorough removal of residual compound before coating prevents the coating solvent from lifting embedded particles and causing post-application scratches.
연마 작업 후 도장면에 남는 컴파운드 및 각종 첨가제 잔여물 제거에 특화된 전용 클리너로, 유성·수성 컴파운드 모두에 대응합니다. 탈지 효과도 있어 사용 후 바로 코팅 시공이 가능합니다. 코팅 전 잔여 컴파운드를 철저히 제거하지 않으면 코팅 용제에 의해 잔여물이 떠올라 흠집이 발생할 수 있습니다.
- Brand
- Ganbass
- Categories
- Exterior : Degreaser&Dewaxing
- Primary dilution
- RTU ~ 1:20
Key features
- Specialized post-polish cleaner for both oil- and water-based compounds
- Removes embedded compound residues to prevent coating-induced scratches
- Degreasing effect allows immediate coating application after use
- Can be sprayed neat for heavy residue or diluted up to 1:20 for bucket wash
- Use with a scratch-resistant cloth to protect the polished surface
Dilution
- Exterior : Bucket Car Shampoo — RTU ~ 1:20 (1:0-20) (primary)
Usage
- After polishing, rinse the paint surface with water to remove loose compound powder.
- Dilute with water up to approximately 1:20 in a bucket and lather with a scratch-resistant cloth to wash the surface, loosening any embedded residues.
- For stubborn residues, transfer the undiluted product to a spray bottle and apply it directly to the affected areas.
- Rinse thoroughly with water to complete the process.
핵심 특징
- 유성·수성 컴파운드 모두 대응하는 연마 후 전용 클리너
- 잔여 컴파운드 제거로 코팅 시 흠집 발생 방지
- 탈지 효과로 사용 직후 코팅 시공 가능
- 강한 고착물에는 원액 스프레이, 일반 세정은 최대 1:20 희석 사용
- 연마 후 도장 보호를 위해 스크래치리스 클로스 사용 권장
사용법
- 연마 후 도장면에 물을 뿌려 분리된 컴파운드 분말을 헹궈 내십시오.
- 버킷에 물로 최대 약 20배 희석하여 스크래치리스 클로스로 거품을 내며 세정하십시오.
- 고착된 잔여물이 있는 경우 원액을 스프레이 용기에 옮겨 해당 부위에 직접 분사하십시오.
- 물로 충분히 헹궈 마무리하십시오.
Also known as: 간바스, ganbas, Ganbass Kenmazai Jokyo Senzai, 研磨剤除去洗浄剤, 간바스 연마제 잔류 제거 세정제