GYEON Q²R Degrease Dilution Ratios & User Guide

GYEON Q²R Degrease dilution ratio and pH specification chart

Q2R 디그리스

GYEON Q²R Degrease — Exterior : Degreaser&Dewaxing. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/gyeon/q-r-degrease

GYEON Q2R 디그리스 — Exterior : Degreaser&Dewaxing. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/gyeon/q-r-degrease

A pre-coating cleaner and degreaser that eliminates polishing oils and residual protection layers from gelcoat, painted metal, wood, and composite surfaces. It leaves behind a smooth, antistatic and spotless base that allows ceramic coatings to bond correctly and perform as intended. Thorough surface preparation is essential for long-lasting coating results.

코팅 시공 전 젤코트, 도장 금속, 우드, 복합재 표면에서 폴리싱 오일과 잔여 보호막을 제거하는 전처리 클리너 겸 탈지제입니다. 매끄럽고 정전기 없는 깨끗한 베이스를 만들어 세라믹 코팅이 올바르게 결합되고 의도한 대로 성능을 발휘하도록 합니다. 철저한 표면 전처리가 코팅의 장기 내구성을 좌우합니다.

Brand
GYEON
Categories
Exterior : Degreaser&Dewaxing
Primary dilution
RTU
Where to buy
Search on Amazon (US)
Last updated
2026-08-16

How it works

  • Solvent-based — Built mainly on organic solvents; ventilate and spot-test on interior plastics.

Disclosed ingredients

IngredientCASFunction
ethanol; ethyl alcohol64-17-5Solvent
R)-p-mentha-1,8-diene; d-limonene (LIMONENE5989-27-5Solvent

Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.

Key features

  • Efficient polishing oil removal
  • Compatible with all surfaces
  • Pre-coating surface preparation

Dilution

UseDilutionRatio
Exterior : Degreaser&Dewaxing (primary)RTU1:0

Usage

  1. Apply to a clean microfibre towel rather than directly to the surface.
  2. Wipe the surface thoroughly to lift away oils and residues.
  3. Repeat on areas with heavy contamination or product buildup as needed.
  4. Verify the surface is completely clean and free of moisture before continuing.
  5. Proceed immediately with ceramic coating application once dry.

핵심 특징

  • 폴리싱 오일 효과적 제거
  • 모든 표면 호환
  • 코팅 전 표면 전처리

사용법

  1. 표면에 직접 뿌리지 않고 깨끗한 극세사 타올에 도포합니다.
  2. 오일과 잔여물을 제거하기 위해 표면을 꼼꼼히 닦아냅니다.
  3. 오염이 심한 부위는 필요에 따라 반복 작업합니다.
  4. 작업 전 표면이 완전히 깨끗하고 건조한지 확인합니다.
  5. 건조 후 즉시 세라믹 코팅 시공을 진행합니다.

Also known as: 기온, 기온쿼츠, GYEON QUATZ, gyeon quartz, 기연, 쿼츠, GYEON Degrease, Q2R Degrease, 기온 디그리스, Gyeon Degreaser, 기온 탈지제, GYEON 디그리스, 코팅 전 탈지제, 기온 프리코팅 클리너, Q2R 탈지제

한국어로 보기

Sources

  • GYEON official product page
  • Safety Data Sheet (SDS / MSDS)

Related products

More from GYEON

  • Q²R Fabriccoat
  • Defrost
  • Q²M Bathe+
  • Q²M TAR Redefined
  • Q²M Tire Cleaner
  • Q² Leathershield EVO

More Degreaser&Dewaxing products

  • Cleantle Final Prep
  • SWAG WRAP PREP SURFACE CLEANER
  • servFaces Surface Cleaner Ultima
  • EWOCAR Degreaser
  • Menzerna Control Cleaner
  • POLYTOP Lubrikator

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)