ION-PRE-WASH
이온 프리워시
ION-PRE-WASH (BASEFLOCK) is a non-foaming special-ion pre-wash solution applied to the vehicle surface before the main wash, designed to lift and suspend dirt, prevent re-deposition of loosened contaminants, and temporarily increase paint surface toughness to suppress wash-induced scratches. Unlike foam pre-washes, its low-foam formula allows contaminants to remain visible during work, and its hydrophobic property causes water to sheet off the paint surface more effectively, reducing mineral residue.
ION-PRE-WASH (BASEFLOCK)는 본 세차 전에 차량 표면에 분무하는 비거품형 특수 이온 프리워시 용액입니다. 오염물을 부유시키고 재부착을 억제하며, 도장면의 표면 인성을 일시적으로 향상시켜 세차 흠집을 억제합니다. 저기포 특성으로 시공 중 도장면 오염물 확인이 용이하며, 소수성 작용으로 물 흘림성을 높여 미네랄 잔여물을 줄입니다.
- Brand
- Ganbass
- Categories
- Exterior : Pre-washing (Pretreatment)
- Primary dilution
- RTU ~ 1:2
Key features
- Non-foaming ion-based pre-wash for superior soil penetration
- Lifts and suspends dirt to prevent re-deposition during rinsing
- Temporarily reinforces paint surface toughness to suppress wash scratches
- Hydrophobic action improves water sheeting and reduces mineral deposits
- Effective rust inhibitor for use on all paint, glass, and wheel surfaces
- Reduces damage risk from pressure washers and car-wash machines when pre-applied
- Dilutable neat to 3x depending on soil level
Dilution
- Exterior : Pre-washing (Pretreatment) — RTU ~ 1:2 (1:0-2) (primary)
Usage
- Dilute the product if needed according to soil level: use neat for heavy soiling, 1.5-2x dilution for moderate soiling, or 2-3x for light soiling; pour into a spray bottle.
- Spray the product evenly onto the paint surface in manageable sections (do not spray the entire vehicle at once).
- Leave on for 30 to 90 seconds without rubbing and before the surface dries completely.
- Rinse thoroughly with water.
- Proceed with a normal shampoo wash.
핵심 특징
- 우수한 오염물 침투력을 가진 비거품형 이온 프리워시
- 오염물 부유 및 재부착 억제
- 도장면 표면 인성 일시 강화로 세차 흠집 억제
- 소수성 작용으로 물 흘림성 향상 및 미네랄 잔여물 경감
- 도장·유리·휠면에 사용 가능한 방청 성능 포함
- 사전 도포 시 고압 세척기·세차기에 의한 손상 위험 경감
- 오염 강도에 따라 원액부터 최대 3배 희석까지 조절 가능
사용법
- 오염 강도에 맞게 희석합니다: 강한 오염 시 원액, 중간 오염 시 1.5~2배 희석, 가벼운 오염 시 2~3배 희석하여 스프레이 용기에 담습니다.
- 손이 닿는 범위씩 나누어 도장면에 골고루 분무합니다 (차체 전체에 한 번에 분무하지 마세요).
- 문지르지 않고 완전히 마르기 전인 30~90초간 그대로 둡니다.
- 물로 충분히 헹굽니다.
- 이후 일반 샴푸 세차를 진행합니다.
Also known as: 간바스, ganbas, BASEFLOCK, ION-PRE-WASH BASEFLOCK, Ganbass ION-PRE-WASH, Ganbass BASEFLOCK, 간바스 ION-PRE-WASH, 간바스 이온 프리워시, アイオンプレウォッシュ