Graphene Ceramic Spray Coating
그래핀 세라믹 스프레이 코팅
Adam’s Graphene Ceramic Spray Coating is a spray-on ceramic formulation that combines enhanced gloss, extreme hydrophobic properties, and greater than 9H hardness in a straightforward spray-and-wipe application. Its graphene-modified chemistry makes it less prone to water spotting than conventional spray ceramics. Offering up to about 12 or more months of protection, it bridges the gap between a spray sealant and a professional liquid coating.
Adam’s Graphene Ceramic Spray Coating은 스프레이 후 닦아내는 간편한 방식으로 9H 이상의 경도와 극강의 발수 효과를 제공하는 그래핀 세라믹 스프레이 코팅입니다. 워터 스팟이 잘 생기지 않는 특성과 최대 약 12개월 이상의 보호 지속력을 갖추어, 스프레이 실란트와 전문가용 코팅의 중간 성능을 구현합니다.
- Brand
- Adam's Polishes
- Categories
- Exterior : Coating
Key features
- Long-lasting formula
- Less prone to water spotting
- Greater than 9H hardness
- Enriched gloss and extreme hydrophobicity
- Easy spray-and-wipe application
Usage
- Prepare the vehicle using a clay bar or mitt and a swirl killer to fully remove contamination, oxidation, and surface defects.
- Wipe all surfaces with Surface Prep to degrease and remove any residues that could inhibit coating adhesion.
- Shake well, then spray the coating directly onto one panel at a time from about one foot away.
- Spread evenly with a clean microfiber towel using straight, overlapping passes to ensure complete coverage.
- Allow the coating to flash briefly, then buff off the residue with a second clean microfiber towel.
- Use a UV light to verify even coverage before proceeding to the next panel.
- Allow the vehicle to cure fully for the recommended time before washing or exposing it to rain.
핵심 특징
- 장기 지속 포뮬러
- 워터 스팟 발생 감소
- 9H 이상 경도
- 강화된 광택과 극강의 발수 효과
- 간편한 스프레이 후 닦기 시공
사용법
- 클레이 바 또는 미트와 광택기를 사용해 오염물, 산화, 스월 마크를 완전히 제거합니다.
- 서피스 프렙으로 모든 표면을 탈지하여 코팅 밀착을 저해하는 잔여물을 제거합니다.
- 충분히 흔든 후 약 30cm 거리에서 한 패널씩 코팅제를 분사합니다.
- 깨끗한 극세사 타월로 직선 방향으로 겹치며 고르게 펴 바릅니다.
- 코팅이 살짝 플래시되면 새 극세사 타월로 잔여물을 버핑합니다.
- UV 라이트로 도포 상태를 확인하고 다음 패널로 이동합니다.
- 권장 경화 시간 동안 세차나 빗물 노출을 피합니다.