Medium Cut
미디엄 컷
Medium Cut is a mid-abrasion one-step polishing compound that removes moderate scratches and P2000–P2500 sanding marks while leaving a high-gloss finish. Its water-based formula is free from solvents and fillers, delivering high efficiency with minimal dust. It effectively prepares the surface for final finishing with Fine Cut.
미디엄 컷은 중간 연마력의 원스텝 폴리싱 컴파운드로, 중간 수준의 스크래치와 P2000~P2500 샌딩 자국을 제거하면서 높은 광택 마감을 남깁니다. 수성 포뮬라로 용제와 충전제가 없으며, 최소한의 분진으로 높은 효율을 발휘합니다. 파인 컷을 이용한 최종 마감을 위해 표면을 효과적으로 준비시켜 줍니다.
- Brand
- FX Protect
- Categories
- Exterior : Polishes
Key features
- Removes P2000–P2500 sanding marks
- Cut and finish in one step
- High gloss after single-stage correction
- High efficiency with low dust
- Contains aluminum oxide abrasive
- Water-based, solvent-free formula
- Silicone, filler, and wax free
Usage
- Work in a shaded area on a cool surface and thoroughly clean the surface beforehand.
- Test the product on a less visible area before full application.
- Shake the product, then apply a few drops onto a polishing pad.
- Spread over a small section using a machine polisher at appropriate speed settings.
- Polish until the desired result is achieved, then wipe off excess with a microfiber cloth.
- Repeat the process if necessary.
핵심 특징
- P2000~P2500 샌딩 자국 제거
- 컷 및 마감을 한 번에 처리
- 원스텝 교정 후 높은 광택
- 낮은 분진으로 높은 효율
- 산화알루미늄 연마제 함유
- 수성, 무용제 포뮬라
- 실리콘, 충전제, 왁스 미함유
사용법
- 그늘진 곳에서 차가운 표면 위에 작업하고 사전에 표면을 깨끗하게 세정하십시오.
- 전체 적용 전에 눈에 덜 띄는 부위에서 제품을 테스트하십시오.
- 제품을 흔든 후 폴리싱 패드에 몇 방울 도포하십시오.
- 적절한 회전수로 설정된 폴리셔를 사용하여 작은 구역에 고르게 펴 바르십시오.
- 원하는 결과가 나올 때까지 폴리싱한 후 마이크로파이버 천으로 잔여물을 닦아내십시오.
- 필요시 과정을 반복하십시오.
Also known as: fx, 에프엑스, 에프엑스 프로텍트, FX Protect Medium Cut, FX Medium Cut, FXP Medium Cut, MC, 에프엑스 프로텍트 미디엄 컷
한국어로 보기
Sources