미디엄 컷
Medium Cut
미디엄 컷은 중간 연마력의 원스텝 폴리싱 컴파운드로, 중간 수준의 스크래치와 P2000~P2500 샌딩 자국을 제거하면서 높은 광택 마감을 남깁니다. 수성 포뮬라로 용제와 충전제가 없으며, 최소한의 분진으로 높은 효율을 발휘합니다. 파인 컷을 이용한 최종 마감을 위해 표면을 효과적으로 준비시켜 줍니다.
- 브랜드
- FX Protect
- 카테고리
- Exterior : Polishes
핵심 특징
- P2000~P2500 샌딩 자국 제거
- 컷 및 마감을 한 번에 처리
- 원스텝 교정 후 높은 광택
- 낮은 분진으로 높은 효율
- 산화알루미늄 연마제 함유
- 수성, 무용제 포뮬라
- 실리콘, 충전제, 왁스 미함유
사용법
- 그늘진 곳에서 차가운 표면 위에 작업하고 사전에 표면을 깨끗하게 세정하십시오.
- 전체 적용 전에 눈에 덜 띄는 부위에서 제품을 테스트하십시오.
- 제품을 흔든 후 폴리싱 패드에 몇 방울 도포하십시오.
- 적절한 회전수로 설정된 폴리셔를 사용하여 작은 구역에 고르게 펴 바르십시오.
- 원하는 결과가 나올 때까지 폴리싱한 후 마이크로파이버 천으로 잔여물을 닦아내십시오.
- 필요시 과정을 반복하십시오.
Medium Cut is a mid-abrasion one-step polishing compound that removes moderate scratches and P2000–P2500 sanding marks while leaving a high-gloss finish. Its water-based formula is free from solvents and fillers, delivering high efficiency with minimal dust. It effectively prepares the surface for final finishing with Fine Cut.
Key features
- Removes P2000–P2500 sanding marks
- Cut and finish in one step
- High gloss after single-stage correction
- High efficiency with low dust
- Contains aluminum oxide abrasive
- Water-based, solvent-free formula
- Silicone, filler, and wax free
Usage
- Work in a shaded area on a cool surface and thoroughly clean the surface beforehand.
- Test the product on a less visible area before full application.
- Shake the product, then apply a few drops onto a polishing pad.
- Spread over a small section using a machine polisher at appropriate speed settings.
- Polish until the desired result is achieved, then wipe off excess with a microfiber cloth.
- Repeat the process if necessary.
다른 이름: fx, 에프엑스, 에프엑스 프로텍트, FX Protect Medium Cut, FX Medium Cut, FXP Medium Cut, MC, 에프엑스 프로텍트 미디엄 컷
View in English
출처