Heavy Cut
헤비 컷
Heavy Cut is a high-abrasion polishing compound designed to remove deep scratches and oxidation from painted surfaces, capable of eliminating defects from P1200–P1500 sanding marks. Its uniform abrasive grain delivers high polishing efficiency with low dusting, cutting working time significantly. Water-based and free from silicones, fillers, and waxes.
헤비 컷은 P1200~P1500 샌딩 자국을 포함한 깊은 스크래치와 산화 손상을 도장면에서 제거하도록 설계된 고연마 폴리싱 컴파운드입니다. 균일한 연마 입자가 낮은 분진 발생으로 높은 연마 효율을 제공하여 작업 시간을 단축시킵니다. 수성 기반이며 실리콘, 충전제, 왁스를 포함하지 않습니다.
- Brand
- FX Protect
- Categories
- Exterior : Polishes
Key features
- Removes P1200–P1500 sanding marks
- Shortens polishing time
- High gloss finish after correction
- High efficiency with low dust
- Contains aluminum oxide abrasive
- Water-based formula
- Silicone, filler, and wax free
Usage
- Work in a shaded area on a cool surface and thoroughly clean the surface beforehand.
- Test the product on a less visible area before full application.
- Shake the product, then apply a few drops onto a polishing pad.
- Spread over a small section using a machine polisher at appropriate speed settings.
- Polish until the desired result is achieved, then wipe off excess with a microfiber cloth.
- Repeat the process if necessary.
핵심 특징
- P1200~P1500 샌딩 자국 제거
- 폴리싱 시간 단축
- 교정 후 높은 광택 마감
- 낮은 분진으로 높은 효율
- 산화알루미늄 연마제 함유
- 수성 포뮬라
- 실리콘, 충전제, 왁스 미함유
사용법
- 그늘진 곳에서 차가운 표면 위에 작업하고 사전에 표면을 깨끗하게 세정하십시오.
- 전체 적용 전에 눈에 덜 띄는 부위에서 제품을 테스트하십시오.
- 제품을 흔든 후 폴리싱 패드에 몇 방울 도포하십시오.
- 적절한 회전수로 설정된 폴리셔를 사용하여 작은 구역에 고르게 펴 바르십시오.
- 원하는 결과가 나올 때까지 폴리싱한 후 마이크로파이버 천으로 잔여물을 닦아내십시오.
- 필요시 과정을 반복하십시오.
Also known as: fx, 에프엑스, 에프엑스 프로텍트, FX Protect Heavy Cut, FX Heavy Cut, FXP Heavy Cut, HC, 에프엑스 프로텍트 헤비 컷
한국어로 보기
Sources