Adam's Heavy Cutting Compound
아담스 헤비 컷팅 컴파운드
Adams Heavy Cutting Compound is a hyper-cutting formula with diminishing abrasive technology that rapidly removes severe paint defects such as deep scratches, heavy oxidation, and sanding marks, often finishing to a near-final gloss in a single step. It is low-dust and works effectively with both rotary and dual-action polishers.
체감 연마 기술이 적용된 초고절삭 컴파운드로, 깊은 스크래치·심한 산화·샌딩 자국 등 심각한 도장 결함을 빠르게 제거하며 종종 한 단계만으로 거의 완성에 가까운 광택에 도달합니다. 먼지가 적고 싱글 액션 및 듀얼 액션 폴리셔 모두에 적합합니다.
- Brand
- Adam's Polishes
- Categories
- Exterior : Polishes
- pH
- neutral (8)
Key features
- Hyper-cutting diminishing abrasive compound
- Rapid removal of deep scratches, oxidation, and sanding marks
- Near-final gloss achievable in one step
- Low-dust formula
- Compatible with rotary and dual-action polishers
Usage
- Apply a few pea-sized drops of compound to a cutting or heavy-foam polishing pad.
- Spread the compound across the panel at low speed before ramping up to the working speed recommended for your machine.
- Work the compound into the paint using overlapping passes until the product becomes clear and the defects are corrected.
- Wipe away residue with a clean microfiber towel and inspect the area under a detailing light to assess the level of correction achieved.
- Follow with a finishing polish or glaze if additional refinement is needed before applying protection.
핵심 특징
- 초고절삭 체감 연마 컴파운드
- 깊은 스크래치·산화·샌딩 자국 신속 제거
- 원스텝으로 거의 완성에 가까운 광택
- 저분진 포뮬러
- 싱글 액션·듀얼 액션 폴리셔 모두 호환
사용법
- 컷팅 또는 헤비 폼 폴리싱 패드에 콩알 크기의 컴파운드를 몇 방울 올려주세요.
- 작업 속도로 올리기 전 저속으로 패널 전체에 컴파운드를 먼저 펴 바르세요.
- 제품이 투명해지고 결함이 교정될 때까지 겹치는 패턴으로 도장에 컴파운드를 작업하세요.
- 깨끗한 극세사 타올로 잔여물을 닦아내고 디테일링 라이트 아래서 교정 수준을 점검하세요.
- 추가적인 마감 정제가 필요하면 보호 레이어 적용 전 피니싱 폴리시나 글레이즈로 마무리하세요.