Bucket Lid
버킷 뚜껑
The Bucket Lid is a screw-on airtight cover with a double rubber gasket that seals detailing buckets for spill-free transport and safe storage of prepared chemical solutions. It consists of a permanent collar that locks onto the bucket body and a removable screw cap, both made from heavy-duty HDPE.
버킷 리드는 이중 고무 가스켓이 적용된 나사식 밀폐 커버로, 디테일링 버킷을 밀봉하여 준비된 케미컬 용액을 흘리지 않고 안전하게 운반 및 보관할 수 있게 해줍니다. 버킷 본체에 영구 고정되는 칼라와 분리 가능한 나사식 뚜껑으로 구성되며, 모두 두꺼운 HDPE 소재로 제작되었습니다.
- Brand
- FX Protect
- Categories
- Tools : Wash Supplies
Key features
- Double rubber gasket for 100% airtight seal
- Two-part design: permanent collar plus removable screw cap
- Enables spill-free transport of liquids
- Four finger-grip openings for easy tightening and opening
- Thick HDPE construction resistant to detailing chemicals
- Compatible with FX Protect Wash Bucket range
Usage
- Ensure the gaskets on the collar and lid are clean and properly seated, then press the lid firmly and evenly onto the bucket until it locks.
- Before first use, fill the bucket with a small amount of water, screw on the lid, and tilt in different directions to verify there are no leaks.
- To open, unscrew and remove only the lid — the collar stays permanently attached to the bucket body.
- After each use with chemical solutions, rinse the lid and gaskets thoroughly under running water.
- Avoid strong solvents when cleaning and do not expose the lid to prolonged direct UV light.
핵심 특징
- 완전 밀폐를 위한 이중 고무 가스켓
- 영구 고정 칼라와 분리 가능한 나사식 뚜껑으로 구성된 2부품 디자인
- 액체의 흘림 없는 운반 가능
- 손가락 네 개를 위한 손잡이 구멍으로 쉽게 개폐 가능
- 디테일링 케미컬에 강한 두꺼운 HDPE 소재
- FX Protect 워시 버킷 시리즈와 호환
사용법
- 칼라와 뚜껑의 가스켓이 청결하고 올바르게 장착되어 있는지 확인한 후, 뚜껑을 버킷에 단단하고 균일하게 눌러 고정하세요.
- 첫 사용 전 버킷에 소량의 물을 채우고 뚜껑을 잠근 후 여러 방향으로 기울여 누수 여부를 확인하세요.
- 열 때는 뚜껑만 나사를 돌려 분리하세요 — 칼라는 버킷 본체에 영구 고정되어 있습니다.
- 케미컬 용액과 함께 사용한 후에는 뚜껑과 가스켓을 흐르는 물에 충분히 헹궈내세요.
- 세척 시 강한 용제는 피하고, 장시간 직사광선에 노출되지 않도록 하세요.
Also known as: fx, 에프엑스, 에프엑스 프로텍트, FX Protect Bucket Lid, FX Bucket Lid, FXP Bucket Lid, BL, 에프엑스 프로텍트 버킷 뚜껑, 버킷 리드
한국어로 보기
Sources