FX Protect 버킷 뚜껑 사용 가이드

The Bucket Lid is a screw-on airtight cover with a double rubber gasket that seals detailing buckets for spill-free transport and safe storage of prepared chemical solutions. It consists of a permanent collar that locks onto the bucket body and a removable screw cap, both made from heavy-duty HDPE.

Key features

• Double rubber gasket for 100% airtight seal
• Two-part design: permanent collar plus removable screw cap
• Enables spill-free transport of liquids
• Four finger-grip openings for easy tightening and opening
• Thick HDPE construction resistant to detailing chemicals
• Compatible with FX Protect Wash Bucket range

Usage

1. Ensure the gaskets on the collar and lid are clean and properly seated, then press the lid firmly and evenly onto the bucket until it locks.
2. Before first use, fill the bucket with a small amount of water, screw on the lid, and tilt in different directions to verify there are no leaks.
3. To open, unscrew and remove only the lid — the collar stays permanently attached to the bucket body.
4. After each use with chemical solutions, rinse the lid and gaskets thoroughly under running water.
5. Avoid strong solvents when cleaning and do not expose the lid to prolonged direct UV light.