One Cut
원 컷
이우카 · EWO · 이우 · Ewocar One Cut · OC · 이워카 원 컷
One Cut is a professional one-step polishing compound that simultaneously corrects and finishes in a single stage. It tackles sanding marks up to P2000 grit, light-to-medium scratches, and dull or oxidized paint, leaving an extremely glossy, hologram-free finish. Its water-based, low-dust formula allows extended working cycles and easy cleanup. Residue wipes off cleanly, leaving a coating-ready surface with no additional degreasing required. Works exceptionally well with MediumRed and FiberCut pads.
One Cut은 단일 폴리싱 단계에서 교정과 마무리를 동시에 수행하는 전문가용 원스텝 컴파운드입니다. P2000 연마 흔적, 경~중간 정도의 흠집, 흐리거나 산화된 도장을 처리하며 극도로 광택 있는 홀로그램 없는 마감을 남깁니다. 수성 저분진 처방으로 긴 작업 시간과 쉬운 사후 처리가 가능하며, 잔여물을 닦아내면 추가 탈지 없이 코팅 바로 적용 가능한 표면이 만들어집니다. MediumRed 및 FiberCut 패드와 최적의 조합입니다.
- Brand
- EWOCAR
- Categories
- Exterior : Polishes
Key features
- True one-step compound: correction and finishing in a single polishing stage
- Removes sanding marks up to P2000 grit, light-to-medium scratches, and oxidized paint
- Leaves an extremely glossy, hologram-free finish
- Water-based, low-dust formula for extended working cycles and easy cleanup
- Coating-ready surface after wipe-off — no degreasing needed
- Works exceptionally well with MediumRed and FiberCut pads
- Silicone-free and filler-free; compatible with rotary and dual-action polishers
Usage
- Ensure the paint surface is clean, dry, and free of contaminants before starting.
- Apply a small amount of One Cut to an Ewocar MediumRed or FiberCut pad.
- Set the polisher to a low speed and spread the compound evenly across the section before ramping up to working speed.
- Work the section in overlapping passes until defects (sanding marks, light-to-medium scratches, oxidation) are corrected and a glossy, hologram-free finish appears.
- Wipe off the residue with a clean microfiber cloth. The surface is immediately coating-ready — no additional degreasing required.
핵심 특징
- 진정한 원스텝 컴파운드: 단일 폴리싱 단계에서 교정과 마무리 동시 수행
- P2000 연마 흔적, 경~중간 흠집, 산화 도장 제거
- 극도로 광택 있는 홀로그램 없는 마감
- 긴 작업 시간과 쉬운 사후 처리를 위한 수성 저분진 처방
- 닦아낸 후 추가 탈지 없이 바로 코팅 적용 가능
- MediumRed 및 FiberCut 패드와 최적 조합
- 실리콘 및 충전제 미함유; 로터리 및 더블액션 폴리셔 호환
사용법
- 작업 전 도장 표면이 깨끗하고 건조하며 오염물이 없는지 확인합니다.
- Ewocar MediumRed 또는 FiberCut 패드에 One Cut을 소량 도포합니다.
- 폴리셔를 저속으로 설정하고 작업 구간 전체에 컴파운드를 고르게 펴 바른 후 작업 속도로 높입니다.
- 겹치는 패스로 작업 구간을 연마하며, 흠집(연마 흔적, 경~중간 스크래치, 산화)이 제거되고 광택 있는 홀로그램 프리 마감이 나타날 때까지 작업합니다.
- 깨끗한 극세사 타월로 잔여물을 닦아냅니다. 표면은 즉시 코팅 적용 가능한 상태가 되며 추가 탈지가 필요 없습니다.