Dr. Beasley's Total Decon Dilution Ratios & User Guide

Dr. Beasley's Total Decon dilution ratio and pH specification chart

토탈 디콘

Dr. Beasley's Total Decon — Exterior : Remover, neutral pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/dr-beasley-s/total-decon

Dr. Beasley's 토탈 디콘 — Exterior : Remover, pH neutral. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/dr-beasley-s/total-decon

Total Decon is a chemical decontaminant that lifts and removes embedded contaminants from automotive paint, including iron particles from brake dust and industrial fallout. By dissolving iron deposits before they oxidize and damage the paint, it reduces the amount of claying required and helps prepare surfaces for ceramic coating application.

토탈 디콘은 브레이크 분진과 산업 낙진에서 비롯된 철분 입자를 포함한 도장 내 박힌 오염물질을 화학적으로 분해하여 제거하는 디컨타미네이션 제품입니다. 철분이 산화되어 도장을 손상시키기 전에 제거함으로써 클레이 작업량을 줄이고 세라믹 코팅 전 표면 준비에 효과적입니다.

Brand
Dr. Beasley's
Categories
Exterior : Remover
Primary dilution
RTU
pH
neutral (7)
Where to buy
Search on Amazon (US)
Last updated
2026-08-16

Key features

  • Removes iron particles from brake dust and rail dust
  • Eliminates industrial fallout from paint
  • Reduces claying effort and time
  • Prevents paint oxidation from iron contamination
  • Prepares surface for nanocoating
  • Compatible with glass and headlights

Dilution

UseDilutionRatio
Exterior : Remover (primary)RTU1:0

Usage

  1. Wash and dry the vehicle before application.
  2. Spray Total Decon onto one panel or small section at a time.
  3. Dampen a clean microfiber towel with water, wring until just damp, then wipe the panel in long linear strokes for full coverage.
  4. Allow the product to dwell for a few moments; do not let it dry on the surface.
  5. Using a fresh dry microfiber towel, gently buff the product away without applying heavy pressure.
  6. Repeat the process panel by panel across the entire vehicle.
  7. Rinse and thoroughly dry the vehicle to remove all product residue.

핵심 특징

  • 브레이크 분진 및 철도 낙진의 철분 입자 제거
  • 도장의 산업 낙진 제거
  • 클레이 작업 시간 및 노력 절감
  • 철분으로 인한 도장 산화 방지
  • 나노코팅 전 표면 준비
  • 유리 및 헤드라이트에 사용 가능

사용법

  1. 시공 전 차량을 세차하고 건조시킵니다.
  2. 토탈 디콘을 한 번에 한 패널 또는 소구역에 스프레이합니다.
  3. 마이크로파이버 타월을 물에 적셔 꼭 짠 후, 패널 전체를 길고 직선적인 스트로크로 닦습니다.
  4. 제품이 표면에서 건조되지 않도록 주의하며 잠시 반응시킵니다.
  5. 깨끗하고 건조한 새 마이크로파이버 타월로 과도한 압력 없이 부드럽게 닦아냅니다.
  6. 차량 전체를 패널별로 반복합니다.
  7. 차량을 헹구고 완전히 건조하여 잔여물을 제거합니다.

Also known as: 닥터 비슬리, 비슬리, Beasley, dr Beasley, Beasley's, Dr. Beasley's Total Decon, TD, Dr. Beasley's TD, 닥터 비즐리 토탈 디콘, 닥터 비즐리 TD

한국어로 보기

Sources

  • Dr. Beasley's official product page
  • Safety Data Sheet (SDS / MSDS)

Related products

More from Dr. Beasley's

  • NSP 150
  • Tiger Grip Orange Nitrile Gloves
  • Matte Paint Coating
  • Buff and Shine Uro-Tec Soft White Finishing Foam Grip Pad
  • Carpet Stone
  • Matte Decon

More Remover products

  • Elite Detailer Red Shock Rim
  • CarPro Spotless 2.0
  • Elite Detailer Oil Spotter
  • Tershine Descale
  • The Class Iron Remover Extract
  • Ganbass REBOOT-TYPE-NC

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)