Dr. Beasley's NSP Z1 User Guide

Dr. Beasley's NSP Z1 — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/dr-beasley-s/nsp-z1
Dr. Beasley's NSP Z1 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/dr-beasley-s/nsp-z1
NSP Z1 is a one-step all-in-one correcting primer and ceramic nanocoating that removes swirls and oxidation while simultaneously depositing a ceramic coating lasting one year or more. Formulated with composite microsphere abrasives ranging from 0.45 to 0.95 μm, it delivers cut, finish, and coating in a single machine-polishing pass.
NSP Z1은 소용돌이 흠집과 산화를 제거하는 동시에 1년 이상 지속되는 세라믹 코팅을 도포하는 올인원 교정 프라이머입니다. 0.45~0.95μm 범위의 복합 마이크로스피어 연마재가 함유되어 있어 도막 연마, 마무리, 코팅을 단 한 번의 기계 연마 공정으로 완성합니다.
- Brand
- Dr. Beasley's
- Categories
- Exterior : Polishes
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-06-23
How it works
- Petroleum solvent — Dissolves tar and grease; best not left to dwell on paint.
- Solvent-based — Built mainly on organic solvents; ventilate and spot-test on interior plastics.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| C12-C14 Isoalkanes | 68551-19-9 | Solvent |
| Dipropylene glycol monomethyl ether | 34590-94-8 | Solvent |
| Naphtha (petroleum) hydrotreated heavy | 64742-48-9 | Solvent |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Removes swirls and oxidation in one step
- Applies 1+ year ceramic nanocoating during correction
- 0.45–0.95 μm composite microsphere abrasives
- No panel wipe or IPA required after use
- Concentrated formula: fewer passes, less product
- Body shop safe — contains no polymerized siloxanes
Usage
- Thoroughly decontaminate the surface by washing, chemically treating with a decontamination product, and mechanically claying before applying NSP Z1.
- Working on one panel or small area at a time, apply NSP Z1 and make 5–8 section passes with a foam pad and machine buffer at medium speed with minimal pressure.
- Wipe the worked area with a clean microfiber towel, then inspect under a bright light to assess results.
- Repeat steps 2–3 on each remaining panel until all paintwork is corrected to the desired level.
핵심 특징
- 소용돌이 흠집 및 산화 한 번에 제거
- 교정 과정 중 1년 이상 지속 세라믹 코팅 도포
- 0.45~0.95μm 복합 마이크로스피어 연마재
- 사용 후 패널 와이프 또는 IPA 불필요
- 농축 포뮬라: 적은 횟수와 사용량으로 결과 달성
- 보디샵 안전 포뮬라 — 폴리머화 실록세인 미함유
사용법
- NSP Z1 시공 전 세차, 화학적 오염 제거 및 클레이 작업으로 표면을 철저히 세정하십시오.
- 한 번에 하나의 패널 또는 작은 구역을 작업하며, 폼 패드와 기계 버퍼를 중간 속도·최소 압력으로 사용해 5~8회 섹션 패스를 실시하십시오.
- 작업한 구역을 깨끗한 마이크로파이버 타월로 닦은 후 강한 조명 아래에서 결과를 점검하십시오.
- 원하는 수준의 도막 교정이 완료될 때까지 나머지 패널에 2~3단계를 반복하십시오.
Also known as: 닥터 비슬리, 비슬리, Beasley, dr Beasley, Beasley's, Dr. Beasley's NSP Z1, Z1, 닥터 비즐리 NSP Z1
Sources
Related products
More from Dr. Beasley's
- AdvanceCoat: Glass
- Grit Guard
- Adhesive Remover
- Marine Decon
- Buff and Shine EdgeGuard Maroon Medium Cut Foam Pad
- Edgeless Microfiber Towel
More Polishes products
- NANOSKIN SUPER CUT
- Swissvax Cleaner Fluid Medium
- CarPro Essence
- Ganbass WINK
- Soft99 Rubbing Compound - All-purpose
- servFaces Ultra Fine Cut