Clay Spray
클레이 스프레이
Clay Spray is a clay bar lubricant that goes beyond ordinary slipperiness by incorporating surfactants to actively loosen and break up bonded particles the clay bar is meant to remove. This dual-action approach results in more thorough surface decontamination and a smoother paint finish ready for polishing.
클레이 스프레이는 단순한 윤활을 넘어 계면활성제를 포함해 클레이 바가 제거해야 할 미세 오염 입자를 능동적으로 분리·이탈시키는 클레이 바 전용 윤활제입니다. 이 이중 작용 방식으로 보다 철저한 표면 오염 제거와 연마 작업에 적합한 더욱 매끈한 도장면을 얻을 수 있습니다.
- Brand
- Dr. Beasley's
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
Key features
- High-lubricity clay bar lubricant
- Contains surfactants to loosen bonded contaminants
- More effective claying with dual-action formula
- Safe on glass, paint, and chrome
Dilution
- Exterior : Polishes — RTU (1:0) (primary)
Usage
- Start with a freshly washed exterior surface.
- Shake Clay Spray well before use.
- Mist a light, even coat onto a roughly two-square-foot section of the surface.
- Gently glide the clay bar back and forth over the lubricated area until it moves freely.
- Apply additional Clay Spray as needed to keep the surface well-lubricated.
- Wipe away any residue with a clean microfiber towel and move on to the next section.
핵심 특징
- 높은 윤활성의 클레이 바 전용 윤활제
- 표면에 달라붙은 오염물을 이탈시키는 계면활성제 함유
- 이중 작용 포뮬러로 더욱 효과적인 클레이 작업
- 유리, 도장면, 크롬에 안전하게 사용 가능
사용법
- 세차를 마친 깨끗한 외장 표면에서 시작하세요.
- 사용 전 클레이 스프레이를 충분히 흔들어 주세요.
- 약 60×60cm 구역에 가볍고 균일하게 분사하세요.
- 클레이 바를 윤활된 구역 위에서 부드럽게 앞뒤로 밀어 표면 위에서 자유롭게 미끄러질 때까지 작업하세요.
- 필요하면 추가로 분사하여 충분한 윤활 상태를 유지하세요.
- 깨끗한 마이크로파이버 타월로 잔여물을 닦아내고 다음 구역으로 이동하세요.
Also known as: 닥터 비슬리, 비슬리, Beasley, dr Beasley, Beasley's, Dr. Beasley's Clay Spray, CS, Dr. Beasley's CS, 닥터 비즐리 클레이 스프레이, 닥터 비즐리 CS
한국어로 보기
Sources