Cut Pro
컷 프로
A professional cutting compound with high cutting power formulated to remove severe paint defects including P1000 sanding marks from harder clear coat and acrylic surfaces. It can serve as a preparatory product before finishing or as a one-step solution on harder paints, with the advantage of low dust, extended working time, and straightforward wipe-off. The formula is water-based and polymer-free.
경질 클리어 코트 및 아크릴 도장면에서 P1000 샌딩 자국을 포함한 심각한 도장 결함을 제거하도록 설계된 전문 컷팅 컴파운드입니다. 피니싱 전 전처리 제품 또는 경질 도장면의 원스텝 솔루션으로 활용 가능하며, 저분진, 긴 작업 시간, 간편한 닦아내기가 장점입니다. 수성 및 폴리머 프리 성분입니다.
- Brand
- ADBL
- Categories
- Exterior : Polishes
Key features
- High cutting power for severe defect removal
- Eliminates P1000 sandpaper marks
- Optimized for harder paint structures
- Usable as one-step product on harder paints
- Low dust generation
- Long working time
- Easy wipe-off
- Water-based, polymer-free formula
Usage
- Use ready to use — no dilution required. Shake well before use.
- Apply to an unimpregnated pad using a maximum of 4 drops per 40 x 40 cm panel section.
- Work the compound with a Dual-Action or rotary machine on a well-cleaned surface. Avoid direct sunlight during application.
- After polishing, degrease the paint surface to remove compound residue.
핵심 특징
- 심각한 결함 제거를 위한 강한 절삭력
- P1000 샌딩 자국 제거
- 경질 도장면에 최적화
- 경질 도장면에서 원스텝 제품으로 활용 가능
- 저분진
- 긴 작업 시간
- 간편한 닦아내기
- 수성, 폴리머 프리 성분
사용법
- 희석 없이 바로 사용합니다. 사용 전 충분히 흔들어 주세요.
- 오염되지 않은 패드에 40 x 40 cm 패널당 최대 4방울을 도포합니다.
- 깨끗이 세정된 표면에서 DA 또는 회전식 머신으로 연마합니다. 작업 중 직사광선을 피하세요.
- 연마 후 컴파운드 잔여물 제거를 위해 도장면을 탈지합니다.