Type 3: 3 Year Graphene Coating
타입 3: 3년 그래핀 코팅
A TEOS-based ceramic graphene coating tuned for an easier application that still adds gloss, slickness, and lasting protection. The TEOS chemistry helps reduce clogging and fracturing, and the product is rated for paint, PPF and vinyl, glass, trim, chrome, and wheels. Ships with a foam applicator and uses Instant Bond Technology.
TEOS 기반의 세라믹 그래핀 코팅으로, 작업성을 높이면서도 광택과 발수감, 지속적인 보호를 제공합니다. TEOS 처방이 막힘과 균열 발생을 줄여주며 도장면, PPF와 비닐, 유리, 트림, 크롬, 휠 등 다양한 표면에 사용할 수 있습니다. 폼 어플리케이터가 동봉되며 Instant Bond Technology가 적용되어 있습니다.
- Brand
- DIY Detail
- Categories
- Exterior : Coating
Key features
- About 3 year ceramic graphene protection
- TEOS-based formula for clog and durability balance
- Adds visible gloss and slickness
- Instant Bond Technology
- Compatible with PPF and vinyl wraps
- Safe on paint, PPF, vinyl, glass, trim, chrome, and wheels
Usage
- Begin with a clean, dry, and fully decontaminated surface.
- Confirm that the surface temperature stays above about 50 degrees Fahrenheit for at least an hour.
- Prep the panel with DIY Detail Panel Prep or a comparable adhesion promoter polish.
- Open the cap to expose the dropper and make sure it is seated correctly.
- Place about 8 to 10 drops on the applicator and spread the product across the panel.
- On follow-up panels, top up with about 2 to 3 additional drops.
- Let the coating flash, level it with a Level One towel, then refine with a Freebird 400 towel.
- The vehicle can return to use after about an hour.
- After about 3 days you can wash with DIY Detail Rinseless Wash.
- Allow roughly 7 days for the coating to fully cure.
핵심 특징
- 약 3년 세라믹 그래핀 보호
- 막힘 저감과 내구성을 균형 잡은 TEOS 처방
- 확연한 광택과 발수감
- Instant Bond Technology 적용
- PPF·비닐 랩과 호환
- 도장면·PPF·비닐·유리·트림·크롬·휠에 안전
사용법
- 깨끗하게 세척하고 디컨까지 마친 마른 도장면에서 시작하세요.
- 표면 온도가 약 50°F(10°C) 이상이며 최소 1시간 이상 유지되는지 확인하세요.
- DIY Detail Panel Prep이나 그에 준하는 접착 촉진 폴리시로 표면을 정리하세요.
- 코팅 캡을 열어 드롭퍼가 제대로 결합되어 있는지 확인하세요.
- 어플리케이터에 약 8~10방울을 떨어뜨리고 패널 전체에 펴 발라주세요.
- 다음 패널에는 약 2~3방울만 추가로 묻혀 작업하세요.
- 플래시 후 Level One 타월로 레벨링하고 Freebird 400 타월로 마무리하세요.
- 도포 후 약 1시간이 지나면 차량을 다시 사용할 수 있습니다.
- 약 3일이 지난 뒤부터 DIY Detail Rinseless Wash로 세차하세요.
- 완전 경화에는 약 7일 정도가 필요합니다.