Clay Towel
클레이 타월
DIY Detail Quad Fold Fine Grade Clay Towel, also called a perforated synthetic decontamination towel, is a 12 by 12 inch microfiber towel that lifts medium to heavy bonded contaminants like sap, water spots, overspray, bug residue, and industrial fallout. The quad fold gives four working faces to extend usable life and limit corner wear, and unlike a clay bar the towel rinses clean and goes back to work. It is safe on paint, glass, and metal during a wash or a standard decontamination step.
DIY Detail 쿼드 폴드 파인 그레이드 클레이 타월(천공형 합성 디컨타미네이션 타월)은 12 by 12인치 마이크로파이버 제품으로, 수액과 워터스팟, 오버스프레이, 벌레 자국, 산업 낙진 같은 중·강도 고착 오염을 들어냅니다. 쿼드 폴드 구조 덕분에 네 면을 번갈아 사용할 수 있어 수명이 길고 모서리 손상이 적으며, 클레이바와 달리 헹궈 다시 사용할 수 있습니다. 도장과 유리, 금속에 모두 안전해 세차나 일반 디컨타미네이션 과정에서 쓸 수 있습니다.
- Brand
- DIY Detail
- Categories
- Tools : Wash Supplies
Key features
- Quad fold design with four working faces
- Rinse and reuse, longer working life
- Safe on paint, glass, and metal
- 12 by 12 inch with microfiber flexible edge
- Lifts bonded contaminants without scratching
- Synthetic perforated decontamination towel
Usage
- Work on a cool surface out of direct sun and apply clay lubricant to avoid material transfer.
- Wash method: rinse the loose dirt and debris off the vehicle first.
- Spray clay lube onto the towel and the panel, treating one panel at a time.
- Move from the top of the car downward to limit cross-contamination.
- Keep the towel well lubricated until every panel has been worked.
- Standard decon: wash and rinse the surface to clear loose grit before claying.
- Coat each panel generously with clay lube before working it.
- Glide the clay towel over the panel until it slides smoothly without grabbing.
- Wipe off remaining lubricant with a clean microfiber and dry the panel before moving on.
핵심 특징
- 쿼드 폴드 구조로 4면 사용
- 헹궈 재사용, 긴 수명
- 도장·유리·금속에 안전
- 12 by 12인치, 마이크로파이버 플렉시블 엣지
- 스크래치 없이 고착 오염 제거
- 합성 천공형 디컨타미네이션 타월
사용법
- 직사광선을 피해 시원한 표면에서 작업하고, 잔여물 전이를 막기 위해 클레이 윤활제를 사용합니다.
- 세차 과정 안에서: 차량의 느슨한 먼지와 이물질을 먼저 헹궈 제거합니다.
- 클레이 윤활제를 타월과 패널에 함께 분사하며 한 면씩 작업합니다.
- 교차 오염을 줄이기 위해 차량 위쪽부터 시작해 아래로 내려옵니다.
- 모든 패널을 끝낼 때까지 타월이 마르지 않도록 윤활을 유지합니다.
- 표준 디컨타미네이션: 표면을 세차하고 헹궈 느슨한 오염을 먼저 제거합니다.
- 각 패널에 클레이 윤활제를 충분히 도포한 뒤 작업을 시작합니다.
- 타월이 패널 위에서 부드럽게 미끄러질 때까지 가볍게 문지릅니다.
- 남은 윤활제는 깨끗한 마이크로파이버로 닦아내고 건조한 다음 다음 패널로 넘어갑니다.