Citrus Foam²
시트러스 폼²
Citrus Foam² is a concentrated, slightly alkaline (pH 10) pre-wash foam with a pink grapefruit scent that loosens dirt and degreases surfaces without sodium or potassium hydroxide. It builds a dense, long-clinging foam that suits foam lances, manual foamers, pre-spraying, or even use as a diluted maintenance shampoo. The formula is compatible with ceramic coatings, waxes, sealants and chrome, is biodegradable, and yields up to about 500 L of working solution per liter of concentrate.
시트러스 폼²는 핑크 그레이프프루트 향의 농축 약알칼리(pH 10) 프리워시 폼으로, 수산화나트륨이나 수산화칼륨 없이 오염을 풀고 표면을 탈지합니다. 밀도 높고 오래 머무는 거품을 만들어 폼 랜스, 수동 폼건, 프리스프레이는 물론 묽게 희석해 버킷 샴푸로도 사용할 수 있습니다. 세라믹 코팅, 왁스, 실런트, 크롬과 호환되고 생분해성이 좋으며 1 L 농축액으로 약 500 L까지 사용액을 만들 수 있습니다.
- Brand
- Cleantle
- Categories
- Exterior : Foam, Exterior : Pre-washing (Pretreatment), Exterior : Bucket Car Shampoo
- Primary dilution
- 1:10~1:40
- pH
- alkali (10)
Key features
- Slightly alkaline foam (pH 10)
- No sodium or potassium hydroxide
- Dense, long-dwelling, well-adhering foam
- Compatible with coatings, waxes, sealants and chrome
- Usable as foam, pre-spray or diluted shampoo
- Yields up to about 500 L of working solution per 1 L
- Easily biodegradable
- Pink grapefruit scent
Dilution
- Exterior : Foam — 1:10~1:40 (1:10-40) (primary)
- Exterior : Pre-washing (Pretreatment) — 1:10~1:40 (1:10-40)
- Exterior : Bucket Car Shampoo — 1:250~1:500 (1:250-500)
Usage
- Dilute to match your foamer and desired density (PA foamer 1:10–1:20, manual foamer 1:20–1:40, pre-spray 1:10–1:40, shampoo 1:250–1:500).
- Apply an even layer of foam onto the surface with a foam gun.
- Let the foam dwell for about 3–8 minutes without letting it dry.
- Rinse thoroughly under high pressure.
- Do not apply to hot surfaces and avoid letting the product dry.
핵심 특징
- 약알칼리성 폼 (pH 10)
- 수산화나트륨·수산화칼륨 무첨가
- 밀도 높고 오래 머무는 거품
- 코팅, 왁스, 실런트, 크롬과 호환
- 폼, 프리스프레이, 희석 샴푸로 활용
- 1 L 농축액으로 약 500 L 사용액
- 생분해성 우수
- 핑크 그레이프프루트 향
사용법
- 폼건 종류와 원하는 농도에 맞춰 희석합니다(PA 폼건 1:10–1:20, 수동 폼건 1:20–1:40, 프리스프레이 1:10–1:40, 샴푸 1:250–1:500).
- 폼건으로 표면에 거품을 고르게 도포합니다.
- 약 3–8분간 두되 거품이 마르지 않도록 합니다.
- 고압수로 충분히 헹궈냅니다.
- 뜨거운 표면에 사용하지 않고 마르지 않도록 관리합니다.