Mob Shine
몹 샤인
chemx · 케미컬엑스 · 케미컬x · 켐엑스 · Chem-X Mob Shine · MS · Chem-X MS · 켐엑스 몹 샤인
Mob Shine is a non-etching acid-based cleaner designed to dissolve oxidation, remove winter salt, and restore the reflective clarity of polished aluminum without hazing or dulling. Beyond aluminum care, it also serves as an effective wheel and rim cleaner, removing brake dust, diesel soot, insects, and road film.
몹 샤인은 비에칭 산성 클리너로, 연마 알루미늄의 산화물을 분해하고 겨울철 염분을 제거하며 흐림이나 광택 손실 없이 반사 광택을 회복시킵니다. 알루미늄 관리 외에도 휠 및 림 클리너로서 브레이크 분진, 디젤 그을음, 곤충, 도로 이물질 제거에 효과적입니다.
- Brand
- Chem-X
- Categories
- Exterior : Tire&Wheel Cleaner, Exterior : Foam
- Primary dilution
- 1:3~1:100
- pH
- acid (2)
Key features
- Non-etching acid formula
- Restores polished aluminum without hazing
- Removes oxidation and winter salt
- Effective wheel and rim cleaner
- Removes diesel soot and insects
- Neutralizes inorganic salts
- Breaks down road film
Dilution
- Exterior : Tire&Wheel Cleaner — 1:3~1:100 (1:3-100) (primary)
- Exterior : Foam — 1:3 (1:3)
Usage
- Ensure all surfaces are cool to the touch and work out of direct sunlight; do not let product dry on the surface.
- For power washer use: mix 1 gallon of Mob Shine with 3–4 gallons of water, apply through power washer, agitate with a brush, and rinse thoroughly.
- For foam cannon use: fill the foamer to one-quarter capacity with Mob Shine, top off with water, set the metering knob to minimum, apply foam, agitate, and rinse well.
- For brush application: dilute at 1:100 with water in a bucket as a starting point, or apply undiluted for heavy oxidation; agitate with a brush and rinse thoroughly.
- Always wear appropriate personal protective equipment when handling this product.
핵심 특징
- 비에칭 산성 포뮬러
- 흐림 없이 연마 알루미늄 광택 회복
- 산화물 및 겨울 염분 제거
- 효과적인 휠 및 림 클리너
- 디젤 그을음 및 곤충 제거
- 무기 염류 중화
- 도로 이물질 분해
사용법
- 모든 표면이 충분히 식었는지 확인하고 직사광선을 피해 작업하며, 제품이 표면에서 마르지 않도록 합니다.
- 고압 세척기 사용 시: 몹 샤인 1갤런을 물 3~4갤런과 혼합하고, 고압 세척기로 도포 후 브러시로 문지르고 충분히 헹굽니다.
- 폼 캐논 사용 시: 포머를 몹 샤인으로 1/4 채운 후 물로 가득 채우고, 조절 노브를 최소로 설정한 뒤 폼을 도포하고 문질러 충분히 헹굽니다.
- 브러시 도포 시: 버킷에서 물과 1:100 비율로 희석하는 것을 기준으로 시작하거나, 심한 산화의 경우 원액으로 도포합니다. 브러시로 문지른 후 충분히 헹굽니다.
- 제품 사용 시 항상 적절한 개인 보호 장비를 착용합니다.