CarPro CQuartz SiC Dilution Ratios & User Guide
씨쿼츠 SiC
CarPro CQuartz SiC — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/carpro/cquartz-sic
CarPro 씨쿼츠 SiC — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/carpro/cquartz-sic
CQuartz SiC is a ceramic coating enhanced with Silicon Carbide for strong chemical resistance across a wide pH range. It delivers a mirror-like gloss with a highly slick surface and improved resistance to water spotting and environmental contaminants.
넓은 pH 범위에서 강한 화학적 내성을 발휘하도록 탄화규소(SiC)를 첨가한 세라믹 코팅입니다. 거울 같은 광택과 매끄러운 표면을 구현하며, 물자국과 환경 오염물에 대한 저항성이 크게 향상되었습니다.
- Brand
- CarPro
- Categories
- Exterior : Coating
- Primary dilution
- RTU
- Where to buy
- Search on Amazon (US)
- Seen in use
- Full Detail of an Audi A6 - Wash, Polish & Coating — Vermijl Car Detail
- Last updated
- 2026-08-16
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| 3-trimethoxysilylpropane-1-thiol | 4420-74-0 | |
| ethyl acetate | 141-78-6 | Solvent |
| Hexad yltrimethoxysilane | 16415-12-6 | Film former |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Silicon Carbide (SiC) enhanced formula
- Water contact angle about 110 degrees
- Sliding angle about 10 degrees
- Heat tolerance up to about 932 degrees F
- Chemical resistance pH about 2-13
- Improved water spotting resistance
- Mirror gloss with high slickness
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Coating (primary) | RTU | 1:0 |
Usage
- Confirm the surface is clean, dry, and fully decontaminated before application.
- Apply two coats of CQuartz SiC, adding additional coats within about 45-60 minutes or waiting until the next day if beyond about 90 minutes.
- Keep the surface dry for at least about 3 hours after application, or about 24 hours for strongest results.
- Work within an application temperature range of about 50 to 100 degrees Fahrenheit.
핵심 특징
- 탄화규소(SiC) 강화 포뮬라
- 물 접촉각 약 110도
- 슬라이딩 각도 약 10도
- 약 932도 화씨 내열성
- 약 pH 2-13 화학적 내성
- 향상된 물자국 저항성
- 고슬릭 거울 광택
사용법
- 시공 전 표면이 깨끗하고 건조하며 오염이 제거된 상태인지 확인하세요.
- CQuartz SiC를 2회 도포하되, 추가 도포는 약 45-60분 이내에 하거나 약 90분을 초과한 경우 다음날 진행하세요.
- 시공 후 최소 약 3시간, 안정적인 결과를 위해서는 약 24시간 동안 표면을 건조하게 유지하세요.
- 약 10-38도 범위의 온도에서 시공하세요.
Also known as: 카프로, CQUARTZ SiC, CarPro CQuartz SiC, SiC, CP SiC, 씨쿼츠
Sources
Related products
More from CarPro
More Coating products
- POLYTOP Velox Seal
- Nihachi Pro No.20 F Silver
- Yum Cars Yum Ceramic
- Soft99 Refresh Cleaner for Coated Cars
- The Class God Class Crystal Quartz S
- Koch Chemie Ceramic Allround C0.02