CQuartz DLUX
큐쿼츠 디럭스
CQuartz DLUX is a high-silica ceramic coating formulated to restore and protect plastic trim, rubber, and metal surfaces. It chemically bonds to surface pores to deliver a crystal-clear hydrophobic finish and can withstand temperatures up to about 1000 degrees Fahrenheit.
플라스틱 트림, 고무, 금속 표면의 광택을 복원하고 보호하기 위해 설계된 고실리카 세라믹 코팅입니다. 표면 기공에 화학적으로 결합하여 투명하고 발수성 높은 코팅막을 형성하며, 약 1000도 화씨의 고온에서도 견딜 수 있습니다.
- Brand
- CarPro
- Categories
- Exterior : Coating, Exterior : Tire&Wheel Sealant
Key features
- About 50% pure silica content by volume
- Organic silane technology
- Restores gloss and color to trim and rubber
- Chemical bond to surface pores
- Crystal-clear hydrophobic coating
- UV protection
- Heat resistant to about 1000 degrees F
Usage
- Wipe the surface with CarPro Eraser to remove all residue and oils.
- Let the surface dry and allow about 20 minutes for full solvent evaporation.
- If applying to paint or chrome, decontaminate with IronX and polish as needed, then wipe down again with Eraser.
- Apply a small amount of DLUX onto a suede applicator.
- Spread about 1-2 drops per 10 cm section, working one small area at a time.
- Allow the coating to flash for about 1-5 minutes depending on ambient temperature.
- Keep the surface free of water contact for about 1-3 hours to allow full curing.
핵심 특징
- 부피 기준 약 50% 순수 실리카 함량
- 유기 실란 기술
- 트림·고무의 광택 및 색상 복원
- 표면 기공에 화학적 결합
- 투명 발수 코팅
- 자외선 차단
- 약 1000도 화씨 내열성
사용법
- CarPro Eraser로 표면의 잔여물과 유분을 깨끗이 닦아내세요.
- 표면을 건조시킨 후 용제가 완전히 증발하도록 약 20분간 두세요.
- 페인트나 크롬에 시공할 경우, IronX로 오염 제거 후 필요 시 연마하고 Eraser로 재탈지하세요.
- 스웨이드 어플리케이터에 DLUX를 소량 덜어내세요.
- 10cm 단위 구역당 약 1-2방울씩 한 번에 작은 면적을 골고루 펴 바르세요.
- 주변 온도에 따라 약 1-5분간 코팅이 플래시되도록 두세요.
- 완전한 경화를 위해 약 1-3시간 동안 표면에 물이 닿지 않도록 하세요.