CandyCoat Elite
캔디코트 엘리트
CandyCoat Elite is a semi-permanent SiO2-based ceramic nano coating that chemically bonds to a vehicle's clear coat, delivering up to 3 years of paint protection that cannot be washed away like wax or sealant. It fills microscopic surface pores to create a super hydrophobic finish that repels dirt, bugs, bird droppings, and environmental contaminants.
CandyCoat Elite는 반영구적인 SiO2 기반 세라믹 나노 코팅으로, 차량 클리어 코트에 화학적으로 결합하여 최대 3년간 왁스나 실런트와 달리 세차로 씻겨 나가지 않는 도장 보호를 제공합니다. 미세한 표면 기공을 채워 초발수 마감을 형성하고 먼지, 벌레, 새 배설물 등 환경 오염물질을 효과적으로 차단합니다.
- Brand
- CarCandy
- Categories
- Exterior : Coating
Key features
- Semi-permanent SiO2 ceramic nano coating
- Up to 3 years of paint protection
- Chemically bonds to clear coat — does not wash off
- Super hydrophobic, easy-to-clean finish
- 7H hardness rating
- Heat resistance up to 1,400°F
- Compatible with paint, matte, rims, chrome, PPF, vinyl, and trim
- Professional-level coating
Usage
- Clay, polish, and decontaminate paint to remove all scratches, swirls, tar, and water spots before application.
- Wash and fully dry the vehicle, then wipe all surfaces with a prep solvent to remove waxes, silicones, and oils.
- Wearing nitrile gloves, wrap a microfiber suede towel around the applicator and prime it with 1–3 drops of CandyCoat Elite.
- Apply coating to one small panel at a time using a cross-hatch pattern, then wait 30–45 seconds for the product to flash (do not allow it to fully dry).
- Use one microfiber towel to remove excess product and a second to buff the coating to a clear finish with light pressure.
- After completing the vehicle, inspect for high spots; reapply to any missed areas within the first 30 minutes and buff off.
핵심 특징
- 반영구적 SiO2 세라믹 나노 코팅
- 최대 3년 도장 보호
- 클리어 코트에 화학 결합 — 세차로 제거되지 않음
- 초발수로 오염이 쉽게 제거되는 마감
- 경도 7H
- 최대 1,400°F 내열성
- 도장, 무광, 림, 크롬, PPF, 비닐, 트림 호환
- 전문가 수준 코팅
사용법
- 도포 전 클레이, 폴리싱 및 오염 제거 작업으로 스크래치, 스월(미세 흠집), 타르, 워터 스팟을 모두 제거합니다.
- 차량을 세차하고 완전히 건조한 후, 프렙 솔벤트로 표면의 왁스, 실리콘, 오일을 모두 닦아냅니다.
- 니트릴 장갑을 착용하고 극세사 스웨이드 타월을 어플리케이터에 감싼 뒤 CandyCoat Elite 1~3방울로 적셔 줍니다.
- 한 번에 작은 패널 하나씩 격자 패턴으로 코팅을 도포하고 30~45초간 표면에 막이 형성될 때까지 기다립니다 (완전 건조 금지).
- 극세사 타월 하나로 잔여 제품을 제거하고 두 번째 타월로 가벼운 압력을 주며 코팅을 투명하게 버핑합니다.
- 차량 전체 작업 완료 후 코팅이 두껍게 쌓인 부분을 점검하고, 처음 30분 이내에 누락된 부분에 재도포 후 버핑합니다.