Exfoli-Block
엑스폴리-블록
A patented interchangeable polymer clay system designed to replace traditional clay bars and remain safe even on the softest paints. The open-cell foam interface absorbs wash solution and releases it during the claying process, keeping the panel lubricated, preventing it from drying out and creating a safer claying experience. Reusable up to 50 times, the Exfoli-Block ships complete with two interchangeable pads, Medium and Heavy, that cover different contamination levels.
전통적인 클레이 바를 대체하기 위해 개발된 특허받은 인터체인저블 폴리머 클레이 시스템으로, 부드러운 페인트에서도 안전하게 사용할 수 있습니다. 오픈 셀 폼 인터페이스가 워시 솔루션을 흡수했다가 클레잉 과정에서 천천히 방출해 패널이 마르지 않고 윤활을 유지하도록 도와 더 안전한 클레잉이 가능합니다. 최대 50회까지 재사용할 수 있고, 오염 정도에 따라 사용할 수 있는 미디엄과 헤비 두 종의 교체형 패드가 함께 제공됩니다.
- Brand
- Carbon Collective
- Categories
- Tools : Wash Supplies
Key features
- Patented interchangeable polymer clay system
- Safe on the softest paints
- Open-cell foam absorbs wash solution
- Prevents the panel from drying out during use
- Reusable up to 50 times
- Includes Medium and Heavy interchangeable pads
- Heavy pad strips waxes and sealants (use with caution)
Usage
- Use the Exfoli-Block only on clean, wet paint; submerge the block in a strong shampoo and water mix so the foam absorbs the solution.
- Start on the glass and lightly glide the block over the surface in straight, overlapping lines to bed the clay in.
- Return the block to the wash solution after each panel and rinse the clay surface.
- Once the clayed area feels smooth, repeat the process across the whole vehicle, then rinse and dry as normal.
- Always keep the panel lubricated, never use water alone, and avoid contact with strong cleaners or high heat.
핵심 특징
- 특허받은 교체형 폴리머 클레이 시스템
- 가장 부드러운 페인트에서도 안전
- 오픈 셀 폼이 워시 솔루션을 흡수
- 작업 중 패널이 마르지 않게 유지
- 최대 50회까지 재사용 가능
- 미디엄/헤비 교체형 패드 포함
- 헤비 패드는 왁스와 실란트도 제거 (주의 사용)
사용법
- 깨끗하고 젖은 도장면에서만 사용하며, 진한 샴푸 솔루션에 블록을 담가 폼이 용액을 충분히 흡수하게 합니다.
- 유리부터 시작해 블록을 일직선으로 살짝 겹치며 가볍게 미끄러뜨려 클레이를 길들입니다.
- 패널 한 개를 끝낼 때마다 블록을 워시 솔루션에 다시 담그고 클레이 표면을 헹굽니다.
- 클레이 작업한 면이 매끈해질 때까지 차량 전체에 같은 과정을 반복한 뒤 일반적인 방식으로 헹구고 건조합니다.
- 항상 패널이 윤활 상태를 유지하도록 하고, 물만 사용하지 않으며, 강한 세정제나 고온에는 노출시키지 않습니다.