Helix Anti-Corrosion Spray

헬릭스 안티-코로전 스프레이

Underbody and rust protection spray that lays down a transparent soft film to help prevent corrosion, repel moisture and arrest existing rust on flat panels and inside cavities. Thinner than traditional waxy rust-proof products, it dries to a satin finish that resists dust pickup and is safe on alloys, steel, plated and painted finishes, suspension parts and underbody plastics.

차량 하부와 방청을 위한 보호 스프레이로, 투명하고 부드러운 보호막을 형성해 부식을 막고 수분을 밀어내며 평면과 내부 공동부 모두에서 이미 진행된 녹의 확산을 잡아 줍니다. 전통적인 끈끈한 왁스형 방청제보다 묽어 도포가 쉽고, 마른 뒤에는 먼지가 잘 붙지 않는 새틴 마감으로 굳어 알루미늄, 스틸, 도금·도장 마감, 서스펜션 부품, 하부 플라스틱에도 사용할 수 있습니다.

Brand
Carbon Collective
Categories
Exterior : Coating
Primary dilution
RTU
pH
neutral (6)

Key features

Dilution

Usage

  1. Thoroughly clean the area before application and remove loose debris (Elixir Salt Remover recommended).
  2. Spray Helix from top to bottom so the entire surface is evenly covered.
  3. Work product into tighter areas, gaps and cavities to protect from the inside out.
  4. Let the surface dry completely before driving in wet conditions.
  5. For cavity application, swap to the cavity nozzle, slowly feed the brass injector into the cavity and pump while gradually withdrawing the hose.

핵심 특징

  • 투명한 보호 코팅
  • 건조 후 새틴 마감
  • 이미 진행된 녹과 부식 진행 억제
  • 새로운 녹 발생 예방
  • 차량 하부 및 방청 용도
  • 수분 치환·침투 기능
  • 알루미늄·스틸·도금 및 도장 마감에 안전
  • 영국 일상 주행 기준 약 12개월 내구성

사용법

  1. 도포 전 시공 부위를 깨끗이 청소하고 이물질을 제거합니다(엘릭서 솔트 리무버 사용 권장).
  2. 위에서 아래로 전체 표면이 고르게 덮이도록 헬릭스를 충분히 분사합니다.
  3. 좁은 틈과 공동부에는 액이 안쪽까지 들어가도록 강하게 분사해 내부부터 보호합니다.
  4. 젖은 노면을 주행하기 전 표면이 완전히 마를 때까지 충분히 건조시킵니다.
  5. 공동부 시공 시에는 캐비티 노즐로 교체하고 황동 인젝터를 천천히 밀어 넣은 뒤, 트리거를 펌핑하면서 호스를 서서히 빼며 내부 표면을 도포합니다.

Also known as: Carbon Collective Helix Anti-Corrosion Spray, CC Helix Anti-Corrosion Spray, Helix, Carbon Collective Helix, CC Helix, 카본 콜렉티브 헬릭스 안티-코로전 스프레이, 카본 콜렉티브 헬릭스

한국어로 보기

Sources