Touch-Less
터치리스
Touch-Less is a biodegradable sugar-based pre-wash snow foam that delivers strong cleaning when applied via pump spray, trigger or pressure-washer foam lance. The formula leaves out phosphates, solvents, NTA, caustic soda, petrochemical surfactants and preservatives and includes corrosion inhibitors that protect the vehicle during washing.
Touch-Less는 펌프 스프레이, 트리거, 고압세척기 폼 랜스로 도포하면 강한 세정력을 발휘하는 생분해성 슈가 베이스 프리워시 스노우 폼입니다. 인산염·용제·NTA·가성소다·석유계 계면활성제·방부제를 사용하지 않으며 세척 중 차량을 보호하는 부식 억제제가 함께 들어 있습니다.
- Brand
- Bilt Hamber
- Categories
- Exterior : Pre-washing (Pretreatment), Exterior : Foam
- Primary dilution
- 1:50~1:200
- pH
- alkali (10.5)
Key features
- Biodegradable sugar-based formulation
- No phosphates, solvents, NTA or caustic soda
- Used at about 0.5 to 2 percent PIR
- Includes corrosion inhibitors
- Works with pump spray, trigger and pressure-washer foam cannons
Dilution
- Exterior : Pre-washing (Pretreatment) — 1:50~1:200 (1:50-200) (primary)
- Exterior : Foam — 1:50~1:200 (1:50-200)
Usage
- Calibrate the foam lance or pressure washer by measuring water throughput so you can calculate Panel Impact Ratio.
- Dilute Touch-Less to about 0.5 percent PIR for light soiling and up to about 2 percent PIR for heavy soiling, roughly 1:200 to 1:50 in the lance reservoir depending on draw rate.
- Apply a thick even foam over the cool shaded vehicle, working panel by panel.
- Allow about 1 to 5 minutes dwell and never let the foam dry on the surface.
- Pressure-rinse top to bottom and follow with a two-bucket contact wash.
핵심 특징
- 생분해성 슈가 베이스 처방
- 인산염·용제·NTA·가성소다 무함유
- 약 0.5~2% PIR로 사용
- 부식 억제제 함유
- 펌프 스프레이·트리거·고압 폼 캐논 호환
사용법
- 폼 랜스 또는 고압세척기의 물 토출량을 측정해 PIR(패널 임팩트 비율)을 먼저 계산합니다.
- 경오염은 약 0.5% PIR, 중오염은 약 2% PIR이 되도록 희석합니다(장비 인입률에 따라 대략 1:200~1:50).
- 식힌 그늘 상태의 차량 전체에 패널 단위로 두툼하고 균일한 폼을 도포합니다.
- 약 1~5분 체류시키되 표면 위에서 마르지 않게 합니다.
- 위에서 아래로 고압수로 충분히 헹군 뒤 2버킷 접촉 세차로 마무리합니다.