Bilt Hamber Injection Lance
빌트 햄버 인젝션 랜스 (캐비티 왁스 분사 랜스)
The Bilt Hamber Injection Lance is a reusable 600mm cavity injection lance designed for use with Dynax-S50 and compatible with Dynax-UC and Ferrosol. Its precision tip delivers a finely atomised 360 degree mist that helps ensure complete coverage inside enclosed box sections; insert it into a cavity, start spraying and gradually withdraw.
빌트햄버 인젝션 랜스는 Dynax-S50 전용으로 설계된 재사용 가능한 600mm 캐비티 주입 랜스이며, Dynax-UC 및 페로솔과도 호환됩니다. 정밀 팁이 미세하게 분무된 360도 원형 미스트를 만들어 내부 박스 섹션까지 골고루 도포되도록 도와주며, 캐비티에 삽입한 뒤 분사를 시작해 천천히 빼내며 사용합니다.
- Brand
- Bilt Hamber
- Categories
- Tools : Wash Supplies
Key features
- 600mm length for deep cavity access
- Precision tip for fine 360 degree mist
- High-pressure delivery for full internal coverage
- Reusable; threads onto Dynax-S50 aerosols
- Suits box sections, sills, chassis rails and enclosed cavities
Usage
- Attach the injection lance to a compressed-air Schutz or underbody gun used with Dynax S50, UB or UC.
- Fill the gun reservoir with the chosen Dynax wax, pre-warming if needed for easier flow.
- Insert the lance fully into the cavity through access or drain holes in sills, chassis rails or doors.
- With air pressure on, slowly withdraw the lance while triggering to lay an even 360 degree fan along the cavity.
- Wipe the lance clean with white spirit after use and store dry to avoid clogging.
핵심 특징
- 600mm 길이로 깊은 캐비티 접근
- 미세 360도 미스트용 정밀 팁
- 고압 분사로 내부 전체 커버리지
- 재사용 가능, Dynax-S50 에어로졸에 결합
- 박스 섹션·실·섀시 레일·밀폐 캐비티에 적합
사용법
- Dynax S50, UB, UC에 사용되는 에어 슈츠/언더바디 건에 주입 랜스를 결합합니다.
- 선택한 Dynax 왁스를 건 저장소에 채우고 필요 시 살짝 데워 흐름성을 좋게 합니다.
- 실, 섀시 레일, 도어 등의 액세스 또는 배수 홀을 통해 캐비티에 랜스를 깊숙이 끝까지 삽입합니다.
- 에어 압력을 가한 상태에서 트리거를 당기며 랜스를 천천히 빼내 캐비티 전체에 360도 균일한 부채꼴을 형성합니다.
- 사용 후 화이트 스피릿으로 랜스를 닦아내고 막힘을 방지하도록 보관합니다.