Autobrite Direct Superfoam Evasion Dilution Ratios & User Guide

Autobrite Direct Superfoam Evasion dilution ratio and pH specification chart

슈퍼폼 이베이젼

Autobrite Direct Superfoam Evasion — Exterior : Foam, neutral pH, base dilution 1:5~1:7. At 1:5, mix about 200 ml of Autobrite Direct Superfoam Evasion per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/autobrite-direct/superfoam-evasion

Autobrite Direct 슈퍼폼 이베이젼 — Exterior : Foam, pH neutral, 기본 희석 1:5~1:7. 1:5 기준 물 1L당 Autobrite Direct 슈퍼폼 이베이젼 약 200ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/autobrite-direct/superfoam-evasion

Superfoam Evasion is a neon-green coloured, highly concentrated pH-neutral snow foam formulated for touchless pre-wash use via a foam lance. It produces a thick, mousse-style blanket that encapsulates light dust, fingerprints, and road grime, lifting them without any contact with the paintwork. Safe on all existing coatings and wax protection, it features a distinctive aftershave-inspired fragrance and a biodegradable formula.

슈퍼폼 이베이젼은 고농축 pH 중성 스노우폼으로, 폼 랜스를 이용한 비접촉식 프리워시에 적합합니다. 두껍고 무스 형태의 폼 층을 형성하여 가벼운 먼지, 지문, 도로 오염물을 도장면 접촉 없이 분리해 줍니다. 기존 코팅 및 왁스 보호층에 안전하며 생분해 가능한 성분을 사용하고, 독특한 향을 지닌 네온 그린 색상의 제품입니다.

Brand
Autobrite Direct
Categories
Exterior : Foam
Primary dilution
1:5~1:7
pH
neutral
Last updated
2026-06-14

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:5~1:71:5-7

Usage

  1. Add the required amount of Superfoam Evasion to the foam lance bottle and fill with cold water.
  2. Shake the lance bottle gently to mix the solution.
  3. Pre-rinse the vehicle with a pressure washer to remove loose debris.
  4. Apply the green foam from top to bottom, covering the entire vehicle.
  5. Allow the foam to dwell for 5–10 minutes to loosen dirt and grime.
  6. Rinse thoroughly with clean water until all foam is removed.

핵심 특징

  • 도포 시 네온 그린 색상 발현
  • pH 중성 — 모든 코팅·왁스 보호층에 안전
  • 두껍고 무스 형태의 폼 블랭킷 형성
  • 생분해 가능한 성분
  • 독특한 이베이젼 향기
  • 도장면 접촉 없이 가벼운 먼지·지문·오염물 제거
  • 폼 랜스 및 고압 세척기 사용에 적합

사용법

  1. 슈퍼폼 이베이젼을 적정량 폼 랜스 통에 넣고 찬물로 채워 줍니다.
  2. 랜스 통을 가볍게 흔들어 용액을 고루 섞어 줍니다.
  3. 고압 세척기로 차량을 먼저 헹궈 느슨한 오염물을 제거합니다.
  4. 초록색 폼을 위에서 아래 방향으로 차량 전체에 고르게 도포합니다.
  5. 오염물이 분리되도록 5~10분간 방치합니다.
  6. 깨끗한 물로 충분히 헹궈 폼 잔여물을 완전히 제거합니다.

Also known as: 오토브라이트, AGD, autobrite, auto brite, AD, Autobrite Direct Superfoam Evasion, Autobrite Superfoam Evasion, AD Superfoam Evasion, SE, Autobrite Direct SE, Autobrite SE, AD SE, 오토브라이트 다이렉트 슈퍼폼 이베이젼, 오토브라이트 SE

한국어로 보기

Sources

Related products

More from Autobrite Direct

More Foam products

Explore more