Ceramic Shield Lite
세라믹 쉴드 라이트
Ceramic Shield Lite is a 3-year ceramic coating offering straightforward application with an extended working time due to its lower active ceramic content compared to the Pro formula. It delivers outstanding hydrophobicity and a high-gloss finish on paint, PPF, vinyl wraps, gel coat, carbon fibre, and plastics. Safe for use on gloss, satin, and matt painted surfaces, making it ideally suited to the enthusiast detailer seeking durable ceramic protection.
세라믹 쉴드 라이트는 3년 지속 세라믹 코팅으로, 프로 제품 대비 낮은 세라믹 함량 덕분에 작업 시간이 길어 도포가 용이합니다. 도장, PPF, 비닐 랩, 젤 코트, 카본파이버, 플라스틱 등에 뛰어난 발수성과 고광택을 부여합니다. 유광, 새틴, 무광 도장면 모두에 안전하게 사용할 수 있어 내구성 있는 세라믹 코팅을 원하는 일반 사용자에게 적합합니다.
- Brand
- Autobrite Direct
- Categories
- Exterior : Coating
Key features
- 3-year ceramic coating protection
- Extended working time for easier application
- Outstanding hydrophobicity
- High-gloss enhancement
- Suitable for paint, PPF, vinyl wraps, gel coat, carbon fibre, and plastics
- Safe for gloss, satin, and matt painted surfaces
- 3.5H hardness
Usage
- Ensure the vehicle is clean and free from surface contaminants; carry out paint correction if required, then treat all panels with Prep-It or equivalent to remove residual polishing oils.
- Prime the suede applicator by applying approximately 5–6 drops of coating evenly across its surface; on subsequent applications a thin line along the centre is sufficient.
- Apply the coating evenly to an area no larger than 40×40 cm using a cross-hatch technique to achieve complete, even coverage.
- Allow the product to remain on the surface for 1–2 minutes, then buff lightly with a clean lint-free towel to level the coating, followed by a second towel to remove any remaining product.
- Inspect the panel under a suitable light source to identify any high spots or streaks; remove these promptly by applying additional product and buffing immediately before the coating fully cures.
- Allow the coating to cure for approximately 18–24 hours at ambient temperature before exposing to rain or moisture; avoid contact washing for at least 7 days.
핵심 특징
- 3년 지속 세라믹 코팅 보호
- 도포가 쉽도록 연장된 작업 시간
- 뛰어난 발수성
- 고광택 효과
- 도장, PPF, 비닐 랩, 젤 코트, 카본파이버, 플라스틱에 적합
- 유광, 새틴, 무광 도장면에 안전
- 경도 3.5H
사용법
- 차량이 깨끗하고 오염물이 없는지 확인합니다. 필요한 경우 페인트 교정을 실시한 후 프렙 잇 또는 동등한 제품으로 모든 패널의 폴리싱 오일 잔여물을 제거합니다.
- 스웨이드 어플리케이터에 코팅제를 약 5~6방울 고르게 도포하여 프라이밍합니다. 이후 작업에서는 중앙에 얇은 선 형태로 도포하면 충분합니다.
- 40×40cm 이하의 면적에 격자(크로스해치) 기법으로 코팅제를 고르게 도포하여 전체적으로 균일한 도막을 형성합니다.
- 제품을 1~2분간 표면에 유지시킨 후 깨끗한 보풀 없는 타올로 가볍게 버핑하여 코팅을 평탄화하고, 두 번째 타올로 남은 제품을 제거합니다.
- 적합한 광원 아래에서 패널을 점검하여 고점(하이 스팟)이나 줄무늬를 확인합니다. 발견된 경우 코팅이 완전히 경화되기 전에 추가 제품을 도포하고 즉시 닦아냅니다.
- 주변 온도에서 약 18~24시간 경화시킨 후 비나 수분에 노출합니다. 완전 경화를 위해 최소 7일간 접촉 세차를 피합니다.
Also known as: 오토브라이트, AGD, autobrite, auto brite, AD, Autobrite Direct Ceramic Shield Lite, Autobrite Ceramic Shield Lite, AD Ceramic Shield Lite, CSL, Autobrite Direct CSL, Autobrite CSL, AD CSL, 오토브라이트 다이렉트 세라믹 쉴드 라이트, 오토브라이트 다이렉트 CSL
한국어로 보기