Autobrite Direct Magifoam Custard Dilution Ratios & User Guide

Autobrite Direct Magifoam Custard dilution ratio and pH specification chart

매지폼 커스타드

Autobrite Direct Magifoam Custard — Exterior : Foam, alkali pH, base dilution 1:10~1:12. At 1:10, mix about 100 ml of Autobrite Direct Magifoam Custard per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/autobrite-direct/magifoam-custard

Autobrite Direct 매지폼 커스타드 — Exterior : Foam, pH alkali, 기본 희석 1:10~1:12. 1:10 기준 물 1L당 Autobrite Direct 매지폼 커스타드 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/autobrite-direct/magifoam-custard

Magifoam Custard is a vanilla-custard scented, tinted version of Autobrite's Magifoam pre-wash snow foam. Formulated with biodegradable surfactants, it builds a stable, long-dwelling foam that lifts and loosens surface contamination before the contact-wash stage. LSP-safe, it will not strip existing wax or sealant, and clearing loose dirt at this stage reduces the risk of fine scratches during washing.

매지폼 커스타드는 오토브라이트 매지폼 프리워시 스노우폼에 바닐라 커스터드 향과 컬러를 더한 버전입니다. 생분해성 계면활성제로 제조되어 접촉 세차 전 오염물을 들어올리고 분리하는 안정적이고 오래 머무는 폼을 형성합니다. LSP 세이프라 기존 왁스·실란트를 벗겨내지 않으며, 이 단계에서 먼지를 제거해 세차 중 미세 스크래치 위험을 줄여줍니다.

Brand
Autobrite Direct
Categories
Exterior : Foam
Primary dilution
1:10~1:12
pH
alkali (13)
Last updated
2026-07-21

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:10~1:121:10-12

Usage

  1. Add Magifoam Custard to the foam lance bottle and fill the rest with cold water.
  2. Shake the mixture thoroughly to combine.
  3. Pre-rinse the vehicle to remove loose surface dirt.
  4. Adjust the foam lance dial for the desired foam thickness and apply evenly from the top down.
  5. Let the foam dwell for up to 5 minutes, then rinse thoroughly with clean water.
  6. Do not apply to hot surfaces or let the foam dry, and avoid contact with ceramic brake discs.

핵심 특징

  • 바닐라 커스터드 향과 컬러 폼
  • 생분해성 계면활성제 포뮬러
  • 충분한 접촉 시간을 위한 안정적이고 오래 유지되는 폼
  • LSP 세이프 — 왁스·실란트를 벗겨내지 않음
  • 접촉 세차 중 미세 스크래치 위험 감소
  • 경제적인 고희석 비율

사용법

  1. 폼 랜스 용기에 매지폼 커스타드를 넣고 나머지는 차가운 물로 채웁니다.
  2. 혼합물이 잘 섞이도록 충분히 흔들어줍니다.
  3. 차량을 물로 먼저 헹궈 느슨한 표면 오염물을 제거합니다.
  4. 폼 랜스 다이얼을 조절해 원하는 두께로 폼을 설정하고, 위에서 아래로 고르게 분사합니다.
  5. 최대 5분간 방치한 뒤 깨끗한 물로 충분히 헹굽니다.
  6. 뜨거운 표면에 적용하거나 폼이 건조되지 않도록 하고, 세라믹 브레이크 디스크에 닿지 않게 합니다.

Also known as: 오토브라이트, AGD, autobrite, auto brite, AD, Autobrite Direct Magifoam Custard, Autobrite Magifoam Custard, AD Magifoam Custard, 오토브라이트 다이렉트 매지폼 커스타드, 오토브라이트 매지폼 커스타드, 마지폼 커스타드

한국어로 보기

Sources

Related products

More from Autobrite Direct

More Foam products

Explore more