Autobrite Direct Supersheen Dilution Ratios & User Guide

Autobrite Direct Supersheen dilution ratio and pH specification chart

슈퍼쉰

Autobrite Direct Supersheen — Interior : Trim Sealants. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/autobrite-direct/supersheen

Autobrite Direct 슈퍼쉰 — Interior : Trim Sealants. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/autobrite-direct/supersheen

Supersheen is a high-gloss dressing for interior and exterior plastic, vinyl, and rubber surfaces — including dashboards, door panels, tyres, wheel arches, and engine compartments. It delivers a rich, long-lasting shine with a pleasant coconut fragrance, and dries to a non-tacky, non-greasy finish. Can be applied by spray or foam applicator.

슈퍼쉰은 대시보드, 도어 패널, 타이어, 휠 아치, 엔진룸 등 실내외 플라스틱·비닐·고무 표면에 사용하는 고광택 드레싱입니다. 끈적임 없이 풍부하고 지속적인 광택을 부여하며 코코넛 향이 납니다. 스프레이 또는 폼 어플리케이터로 도포할 수 있습니다.

Brand
Autobrite Direct
Categories
Interior : Trim Sealants, Exterior : Tire&Wheel Sealant
Primary dilution
RTU
Last updated
2026-06-15

Key features

Dilution

UseDilutionRatio
Interior : Trim Sealants (primary)RTU1:0
Exterior : Tire&Wheel SealantRTU1:0

Usage

  1. For interior surfaces, spray onto a clean microfibre towel or applicator pad and wipe evenly across the surface.
  2. For exterior plastics, spray onto a foam applicator and work evenly across the area; allow a few minutes to dry, then apply a second coat if a deeper gloss is desired.
  3. For wheel arches and engine bays, spray directly onto the surface; buff away any excess with a microfibre towel to achieve the desired finish.
  4. For tyres, use a foam waffle tyre applicator and layer as needed for the desired gloss level. Do not apply to hot surfaces, foot pedals, steering controls, or tyre treads.

핵심 특징

  • 플라스틱, 비닐, 고무 표면 고광택 마감
  • 실내외 모두 사용 가능
  • 오래 지속되는 광택
  • 끈적임 없는 드라이 마감
  • 스프레이 방식으로 간편 도포
  • 타이어, 휠 아치, 엔진룸에 적합
  • 코코넛 향

사용법

  1. 실내 표면에는 마이크로파이버 타월이나 어플리케이터 패드에 스프레이하여 고르게 닦아줍니다.
  2. 외부 플라스틱에는 폼 어플리케이터에 스프레이하여 고르게 도포하고 몇 분간 건조시킵니다. 더 깊은 광택을 원하면 2회 도포합니다.
  3. 휠 아치와 엔진룸에는 표면에 직접 스프레이하고, 마이크로파이버 타월로 잔여물을 닦아 원하는 마감을 완성합니다.
  4. 타이어에는 폼 와플 타이어 어플리케이터를 사용하여 원하는 광택 수준까지 레이어링합니다. 고온 표면, 발 페달, 조향 장치, 타이어 접지면에는 사용하지 마십시오.

Also known as: 오토브라이트, AGD, autobrite, auto brite, AD, Autobrite Direct Supersheen, Autobrite Supersheen, AD Supersheen, 오토브라이트 다이렉트 슈퍼쉰, 오토브라이트 슈퍼쉰

한국어로 보기

Sources

Related products

More from Autobrite Direct

More Trim Sealants products

Explore more