Cherry Glaze
체리 글레이즈
Cherry Glaze is an all-in-one polish and protectant combining light abrasives to remove surface oxidation and minor scratches, a glazing agent to fill swirl marks and paint defects, and premium Brazilian T1 Carnauba Wax for a high-gloss, protected finish. It can be applied by hand or machine polisher to virtually any hard surface including paintwork, glass, metal, plastic, carbon fibre, and trim, with no chalky residue left behind.
체리 글레이즈는 표면 산화와 미세 스크래치를 제거하는 미세 연마제, 미세 스크래치와 도장 결함을 채워주는 글레이징 성분, 그리고 브라질산 T1 카르나우바 왁스를 하나로 결합한 올인원 광택·보호제입니다. 도장면, 유리, 금속, 플라스틱, 카본 파이버, 트림 등 대부분의 경질 표면에 손이나 기계 폴리셔로 사용할 수 있으며 백화 잔여물이 남지 않습니다.
- Brand
- Autobrite Direct
- Categories
- Exterior : Polishes
Key features
- All-in-one polish, glaze, and carnauba wax
- Light abrasives remove surface oxidation and minor scratches
- Fills swirl marks and minor paint defects
- Brazilian T1 Carnauba Wax for gloss and protection
- Works on paint, glass, metal, chrome, plastic, carbon fibre, and trim
- Applicable by hand or machine polisher
- No chalky residue
Usage
- Ensure the paint surface is clean and dry. Apply a few small drops of Cherry Glaze to a foam hand applicator or microfibre applicator pad.
- Work the product into the surface in small circular motions, covering one panel at a time. When using a machine polisher, apply 4–6 drops to a soft foam pad and work a 2 ft × 2 ft area, starting at low speed and building up to medium–high before stepping back down.
- Allow the product to haze slightly until the residue starts to disappear, then reduce machine speed to low and stop with the pad on the surface.
- Buff off the residue with a clean, plush microfibre cloth to reveal a high-gloss finish.
핵심 특징
- 광택제·글레이즈·카르나우바 왁스 올인원
- 미세 연마제로 표면 산화 및 미세 스크래치 제거
- 미세 스크래치 및 도장 결함 메움
- 브라질산 T1 카르나우바 왁스로 광택과 보호 동시에
- 도장면, 유리, 금속, 크롬, 플라스틱, 카본 파이버, 트림에 사용 가능
- 손 또는 기계 폴리셔 적용 가능
- 백화 잔여물 없음
사용법
- 도장면이 깨끗하고 건조된 상태인지 확인합니다. 폼 어플리케이터 또는 마이크로파이버 패드에 체리 글레이즈를 소량 묻힙니다.
- 한 번에 한 패널씩 원형 동작으로 표면에 골고루 펴 바릅니다. 기계 폴리셔 사용 시 소프트 폼 패드에 4~6방울을 떨어뜨려 약 60×60cm 면적씩 저속에서 시작해 중·고속으로 올린 뒤 다시 저속으로 낮춥니다.
- 잔여물이 사라지기 시작하며 살짝 하얗게 건조되어 올 때까지 기다립니다. 기계 사용 시 저속으로 낮추고 패드를 표면에 댄 채로 정지합니다.
- 깨끗하고 부드러운 마이크로파이버 천으로 잔여물을 닦아내어 고광택 마감을 완성합니다.
Also known as: 오토브라이트, AGD, autobrite, auto brite, AD, Autobrite Direct Cherry Glaze, Autobrite Cherry Glaze, AD Cherry Glaze, 오토브라이트 다이렉트 체리 글레이즈, AIO 광택·보호제 체리 글레이즈
한국어로 보기