래피드 세라믹 스프레이
Rapid Ceramic Spray
Auto Glym · 오토그림 · Autoglym Rapid Ceramic Spray · RCS · Autoglym RCS · 오토글림 래피드 세라믹 스프레이 · 오토글림 RCS · RCS500
분사 후 닦아내는 방식의 세라믹 하이브리드 실란트로, 도장면에 결합해 도포당 약 3개월 정도의 발수 보호 효과를 표시하고 있습니다. 사전 작업이 거의 필요 없고 젖은 도장과 마른 도장 모두에 도포할 수 있으며, UHD Ceramic Coating, LifeShine Exterior Protection, Ultra Deep Shine, Extra Gloss Protection, Polar Seal 위에 탑업으로도 사용할 수 있습니다. 트로피컬 향이 가미되어 있습니다.
- 브랜드
- 오토글림
- 카테고리
- Exterior : Coating, Exterior : Quick Detailer
- 기본 희석 비율
- RTU
핵심 특징
- 스프레이 앤 버프 방식 세라믹 하이브리드 실란트
- 약 3개월까지 발수 보호 효과 표시
- 젖은 도장·마른 도장 모두 도포 가능
- 도장 광택 강화
- 여러 오토글림 보호제 위에 탑업 가능
- 트로피컬 향
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- Magma 또는 Clay Detailing Complete Kit으로 폴아웃까지 제거하며 세차하고, 직사광선과 25도 이상의 도장면을 피합니다.
- 제품을 잘 흔든 뒤 한 번에 어깨너비 이하 면적씩 작업하며, 젖은 도장과 마른 도장 모두 가능합니다.
- 마른 도장에는 패널 또는 깨끗한 마이크로파이버 어플리케이터에 가볍게 분사해 고르게 펴 바릅니다.
- 젖은 도장에는 패널에 가볍게 분사한 뒤 오토글림 InstaDry로 펴 바릅니다.
- 패널당 2~3회 분사(작은 패널은 2회 이하)하고 Hi-Tech Microfibre Finishing Cloth로 광택이 날 때까지 버핑하며 필요 시 천을 교체합니다.
- 2차 도포가 필요하면 24시간 간격을 두고 진행합니다.
A spray-and-buff ceramic hybrid sealant that bonds to paintwork and is rated to give up to around three months of hydrophobic protection per coat. It can be used on wet or dry paint with minimal prep, and works as a top-up over UHD Ceramic Coating, LifeShine Exterior Protection, Ultra Deep Shine, Extra Gloss Protection and Polar Seal. The formula carries a tropical scent.
Key features
- Spray-and-buff ceramic hybrid sealant
- Hydrophobic protection up to about three months
- Applies to wet or dry paintwork
- Adds visible gloss to the finish
- Top-up compatible with several Autoglym protectants
- Tropical scent
Usage
- Wash the car thoroughly and remove fallout with Magma or the Clay Detailing Complete Kit; avoid direct sunlight and surfaces above 25 degrees C.
- Shake well and work an area no larger than shoulder-width at a time, on wet or dry paint.
- On dry paint, spray sparingly onto the panel or onto a clean microfibre applicator and spread evenly.
- On wet paint, spray sparingly onto the panel and spread with an Autoglym InstaDry.
- Use two to three sprays per panel (two on small panels) and buff with a clean Hi-Tech Microfibre Finishing Cloth, changing cloths as needed.
- Leave 24 hours between coats if a second layer is needed.