Auto Glym Polar Wash Dilution Ratios & User Guide

Auto Glym Polar Wash dilution ratio and pH specification chart

폴라 워시

Auto Glym Polar Wash — Exterior : Foam, alkali pH, base dilution 1:1. At 1:1, mix about 1000 ml of Auto Glym Polar Wash per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/auto-glym/polar-wash

Auto Glym 폴라 워시 — Exterior : Foam, pH alkali, 기본 희석 1:1. 1:1 기준 물 1L당 Auto Glym 폴라 워시 약 1000ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/auto-glym/polar-wash

A pH neutral, high-foaming car shampoo formulated for a pressure washer and foam gun. It blankets the car with thick foam that helps cut traffic film when agitated with a mitt, and is safe over existing wax or sealant. Polar Wash is the second step of the Autoglym Polar three-stage wash, between Polar Blast and Polar Seal.

고압세척기와 폼건으로 사용하도록 만들어진 pH 중성 고발포 카샴푸입니다. 두꺼운 거품이 차체를 덮어 미트로 문지를 때 트래픽 필름을 풀어 주며, 기존 왁스나 실란트 위에도 안전하게 쓸 수 있습니다. 오토글림 폴라 3단계 공정 중 두 번째 단계로, 폴라 블래스트 다음 폴라 씰 전에 사용합니다.

Brand
Auto Glym
Categories
Exterior : Foam, Exterior : Bucket Car Shampoo
Primary dilution
1:1
pH
alkali (12)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-07-31

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:11:1

Usage

  1. Ensure bodywork and wheels are cool and out of direct sunlight.
  2. Pre-wash with Polar Blast or pre-rinse to loosen heavy dirt.
  3. Mix Polar Wash with water in the foam bottle no stronger than 50:50 and adjust the foam gun as needed.
  4. Spray from the bottom up across the exterior, including glass and wheels.
  5. Agitate the foam with a sponge or wash mitt for a thorough clean.
  6. Rinse from the bottom up and dry the vehicle.

핵심 특징

  • 고압세척기용 고발포 샴푸
  • 트래픽 필름 제거에 도움
  • pH 중성, 왁스·실란트 위에 사용 가능
  • 안전한 문지름을 위한 점착성 거품
  • 무광·새틴 도장에도 사용 가능

사용법

  1. 차체와 휠이 만졌을 때 시원하고 직사광선이 없는 곳에서 시작합니다.
  2. 폴라 블래스트로 사전 세척하거나 물로 미리 헹궈 두꺼운 오염을 풀어줍니다.
  3. 폼 보틀에 폴라 워시와 물을 50:50보다 진하지 않게 섞고 폼건 설정을 조절합니다.
  4. 유리와 휠 포함 외부 전체에 아래에서 위로 분사합니다.
  5. 스펀지나 워시 미트로 거품을 문질러 꼼꼼히 세척합니다.
  6. 아래에서 위로 충분히 헹군 뒤 건조합니다.

Also known as: 오토글림, 오토그림, Autoglym Polar Wash, PW, Autoglym PW, 오토글림 폴라 워시, 오토글림 PW, PWS002.5

한국어로 보기

Sources

Related products

More from Auto Glym

More Foam products

Explore more