Auto Finesse Medium Polishing Compound No:23 User Guide

Auto Finesse Medium Polishing Compound No:23 dilution ratio and pH specification chart

미디엄 폴리싱 컴파운드 No:23

Auto Finesse Medium Polishing Compound No:23 — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/auto-finesse/medium-polishing-compound-no-23

Auto Finesse 미디엄 폴리싱 컴파운드 No:23 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/auto-finesse/medium-polishing-compound-no-23

Medium Polishing Compound No:23 is a professional-grade medium-cut compound formulated with DAT abrasives to tackle moderate swirl marks and paint defects in clear-coated finishes. Its advanced carrier system delivers exceptional cut, extended working time, and a refined true finish without fillers. It functions effectively as a one-step correction tool on medium-condition paint when paired with medium pads, and can scale up to heavy correction when used with cutting pads.

미디엄 폴리싱 컴파운드 No:23은 클리어코트 마감의 중간 수준 미세 스크래치와 도장 결함을 처리하기 위해 DAT 연마 입자로 제조된 전문 중간 컷 컴파운드입니다. 고급 캐리어 시스템이 충전제 없이 탁월한 컷 능력, 긴 작업 시간, 정제된 진짜 마감을 제공합니다. 미디엄 패드와 함께 사용하면 중간 상태 도장의 단일 단계 보정 도구로 효과적으로 활용되며, 컷팅 패드와 함께 사용하면 강력한 보정 작업도 수행할 수 있습니다.

Brand
Auto Finesse
Categories
Exterior : Polishes
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-14

Key features

Usage

  1. Prime your foam pad with 2 sprays of Pad Prime to prevent dry-scrubbing on a new pad.
  2. Apply 2-4 pea-sized drops of compound directly onto the pad mounted on a machine polisher.
  3. Work a 40 x 40 cm section of paint at speed 1-2, spreading product before increasing to working speed.
  4. Continue working the area until the compound fully breaks down and the desired level of correction is achieved.
  5. Remove residue with a clean microfibre cloth, then apply Panel Wipe to inspect the true paint condition before moving to the next stage.

핵심 특징

  • DAT 연마 입자를 사용한 중간 컷 컴파운드
  • 중간 수준 미세 스크래치 및 도장 결함 제거
  • 긴 작업 시간
  • 충전제 및 광택 강화제 없는 진짜 마감
  • 중간 상태 도장에서 단일 단계 보정 가능
  • 클리어코트 도장 마감에 적합

사용법

  1. 새 패드의 건식 마찰을 방지하기 위해 패드 프라임을 2회 분사하여 패드를 준비합니다.
  2. 머신 폴리셔에 장착된 패드에 컴파운드를 완두콩 크기로 2~4방울 도포합니다.
  3. 약 40×40cm 패널 구역을 속도 1~2에서 제품을 펴 바른 뒤 작업 속도로 높여 작업합니다.
  4. 컴파운드가 완전히 분해되고 원하는 수준의 보정이 이루어질 때까지 계속 작업합니다.
  5. 깨끗한 마이크로파이버 천으로 잔여물을 닦아낸 후, 패널 와이프를 사용해 실제 도장 상태를 확인하고 다음 단계로 넘어갑니다.

Also known as: autofinesse, 오토 피네스, 오토 피너스, Auto Finesse Medium Polishing Compound No:23, AF Medium Polishing Compound No:23, No:23 Compound, Medium Cut No:23, PPC1000, 오토 피네스 미디엄 폴리싱 컴파운드 No:23

한국어로 보기

Sources

Related products

More from Auto Finesse

More Polishes products

Explore more