Auto Finesse Iron Out Dilution Ratios & User Guide

Auto Finesse Iron Out dilution ratio and pH specification chart

아이언 아웃

Auto Finesse Iron Out — Exterior : Remover, neutral pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/auto-finesse/iron-out

Auto Finesse 아이언 아웃 — Exterior : Remover, pH neutral. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/auto-finesse/iron-out

Iron Out is a reactive gel fallout remover that chemically dissolves embedded ferrous metal particles — including brake dust — from paint, glass, and wheels. As it reacts, the formula visibly turns red to signal where contamination is being removed, then rinses cleanly away. It is recommended every 3–6 months on daily drivers and is an essential step before any polishing or protection application.

아이언 아웃은 반응성 젤 타입의 철분 오염 제거제로, 도장면, 유리, 휠에 박힌 철분 입자와 브레이크 분진을 화학적으로 분해합니다. 반응 시 제품이 붉은색으로 변해 오염 위치를 시각적으로 알려주며, 이후 깨끗하게 헹궈냅니다. 광택 작업이나 보호 코팅 전 필수 전처리 단계로, 일반 주행 차량에는 3~6개월마다 사용을 권장합니다.

Brand
Auto Finesse
Categories
Exterior : Remover
Primary dilution
RTU
pH
neutral (6)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-15

Key features

Dilution

UseDilutionRatio
Exterior : Remover (primary)RTU1:0

Usage

  1. Wash the vehicle thoroughly, then ensure the surface is cool and shaded before applying.
  2. Spray or apply Iron Out generously over paintwork, glass, or wheels.
  3. Allow to dwell for 3–5 minutes, watching for the purple/red colour change that indicates active dissolution of iron contamination; leave longer on heavily soiled areas.
  4. If needed, gently agitate stubborn spots with a foam or microfibre applicator to refresh the solution.
  5. Rinse thoroughly with high-pressure water — do not allow the product to dry on the surface.
  6. Follow with a clay bar treatment for full decontamination, or proceed directly to polishing and protection.

핵심 특징

  • 철분 입자와 브레이크 분진을 화학적으로 분해
  • 반응 시 붉은색으로 변해 오염 제거 상태를 확인 가능
  • 미세 스크래치, 부식 예방
  • 도장면, 유리, 휠, 크롬에 안전하게 사용 가능
  • 광택 및 코팅 전 필수 전처리
  • 다양한 외장 표면에 적용 가능

사용법

  1. 차량을 깨끗이 세차한 뒤, 표면이 충분히 식고 그늘진 상태인지 확인합니다.
  2. 도장면, 유리 또는 휠에 아이언 아웃을 충분히 분사하거나 도포합니다.
  3. 3~5분간 반응을 기다리며 자주색/붉은색으로 변하는 것을 확인합니다. 오염이 심한 부위는 더 오래 유지합니다.
  4. 필요한 경우 폼 또는 마이크로파이버 패드로 완고한 부위를 부드럽게 문질러 반응을 재활성화합니다.
  5. 고압 물로 충분히 헹굽니다. 제품이 표면에서 마르지 않도록 주의합니다.
  6. 완전한 오염 제거를 원하면 클레이 바 작업을 진행하고, 그렇지 않으면 바로 광택 또는 코팅 단계로 넘어갑니다.

Also known as: autofinesse, 오토 피네스, 오토 피너스, Auto Finesse Iron Out, AF Iron Out, IO, Auto Finesse IO, AF IO, 오토 피네스 아이언 아웃, 오토 피네스 IO

한국어로 보기

Sources

Related products

More from Auto Finesse

More Remover products

Explore more