AMMO WÄFL Finishing Pad User Guide

AMMO AMMO WÄFL Finishing Pad dilution ratio and pH specification chart

아모 바플 피니싱 패드

AMMO WÄFL Finishing Pad — Tools : Wash Supplies. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/ammo/ammo-w-fl-finishing-pad

AMMO 아모 바플 피니싱 패드 — Tools : Wash Supplies. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/ammo/ammo-w-fl-finishing-pad

A soft foam finishing pad with a waffle-face surface texture, engineered for large-stroke dual-action polishers to enhance gloss, clarity, and surface uniformity after initial paint correction. The waffle pattern promotes airflow, helping maintain a consistent pad temperature and conformable contact on both flat and curved panels. Intended as the follow-up step after cutting with the Sheer Cutting Pad.

초기 도장 보정 후 광택, 투명도, 표면 균일성을 향상시키기 위한 와플 패턴 소프트 폼 피니싱 패드입니다. 대형 스트로크 듀얼 액션 폴리셔 전용으로 설계되었으며, 와플 표면 구조가 통기성을 높여 패드 온도를 안정적으로 유지하고 평면 및 곡면 모두에 균일하게 밀착됩니다. 쉬어 컷팅 패드 사용 후 마무리 단계에서 사용하도록 설계되었습니다.

Brand
AMMO
Categories
Tools : Wash Supplies
Last updated
2026-06-16

Key features

Usage

  1. Center the WÄFL pad on the polisher backing plate and place face-up on a workbench.
  2. Prime the pad by applying X-Foliate in 3 to 4 concentric circles.
  3. Wearing clean latex gloves, massage the product into every pore of the foam.
  4. Place the primed pad face-down on the paint surface and engage the polisher trigger, holding stationary for about 20 seconds.
  5. Gently pump the pad against the paint to work the product through the foam pores.
  6. Apply 3 small additional dots of polishing fluid and work one 2×2 foot section at a time at machine speed 2.5–3.
  7. Blow out or wipe the pad with a microfiber towel after each panel, then reapply in an X pattern before moving to the next section.

핵심 특징

  • 통기성 향상을 위한 와플 패턴 소프트 폼 패드
  • 도장 광택, 투명도, 표면 균일성 향상
  • 경미한 미세 흠집과 컴파운드 헤이즈 제거
  • 장시간 사용 시 패드 온도를 낮게 유지
  • 정밀한 엣지 작업이 가능한 비테이퍼 설계
  • 5인치 및 6인치 직경으로 제공
  • 울 컷팅 패드 사용 후 이상적인 마무리 단계

사용법

  1. WÄFL 패드를 배킹 플레이트 중앙에 맞추고, 패드 면이 위를 향하도록 작업대에 놓으세요.
  2. X-Foliate를 동심원 3~4개 패턴으로 패드에 도포하여 프라이밍하세요.
  3. 깨끗한 라텍스 장갑을 착용하고 제품을 폼의 모든 기공에 골고루 마사지하세요.
  4. 프라이밍된 패드 면이 도장면을 향하도록 놓은 뒤 폴리셔 트리거를 당기고 약 20초간 그 자리에 유지하세요.
  5. 패드를 도장면에 가볍게 눌렀다 뗐다 하며 제품이 폼 기공 전체에 스며들도록 하세요.
  6. 광택 유액 3점을 추가 도포하고, 기계 속도 2.5~3으로 60×60cm 구획씩 작업하세요.
  7. 각 패널 작업 후 마이크로파이버 타월로 패드를 닦거나 블로우아웃하고, X자 패턴으로 제품을 다시 도포한 뒤 다음 구획으로 이동하세요.

Also known as: 아모, AMMO NYC WÄFL Finishing Pad, WÄFL, WAFL, AMMO WAFL, 바플 피니싱 패드

한국어로 보기

Sources

Related products

More from AMMO

More Wash Supplies products

Explore more