ADBL Yeti Pearl Dilution Ratios & User Guide

ADBL Yeti Pearl dilution ratio and pH specification chart

예티 펄

ADBL Yeti Pearl — Exterior : Foam, neutral pH, base dilution 1:20. At 1:20, mix about 50 ml of ADBL Yeti Pearl per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/adbl/yeti-pearl

ADBL 예티 펄 — Exterior : Foam, pH neutral, 기본 희석 1:20. 1:20 기준 물 1L당 ADBL 예티 펄 약 50ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/adbl/yeti-pearl

A neutral active foam made to remove surface contaminants such as mud, dust, insects, and tree residue. At a low effective dose of 50 ml per 1 L it forms a milky consistency that penetrates and lubricates dirt, cutting product use by about 50% compared with similar foams. A masculine perfume scent sets it apart from other Yeti variants.

진흙, 먼지, 곤충 잔해, 수액 같은 표면 오염물을 제거하도록 만든 중성 액티브 폼입니다. 1리터당 50ml의 적은 양으로도 밀키한 농도를 만들어 오염물에 침투·윤활하며, 유사 폼 대비 약 50% 적은 사용량으로 세정합니다. 남성 향수 계열의 향이 다른 예티 시리즈와 구별되는 특징입니다.

Brand
ADBL
Categories
Exterior : Foam, Exterior : Pre-washing (Pretreatment)
Primary dilution
1:20
pH
neutral
Last updated
2026-06-04

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:201:20
Exterior : Pre-washing (Pretreatment)1:5001:500

Usage

  1. Prepare the working solution: 50 ml per 1 L for a PA foamer, or dilute 1:500 for a hand-pressure foamer.
  2. Apply the foam solution evenly over the vehicle.
  3. Do not let the product dry on the surface.
  4. After about 5 minutes, rinse thoroughly with water.

핵심 특징

  • 중성 pH 액티브 폼
  • 진흙, 먼지, 곤충, 수액 제거
  • 밀키한 농도로 소량 사용
  • 유사 제품 대비 약 50% 사용량 절감
  • 오염물 침투 및 윤활
  • 남성 향수 계열의 향

사용법

  1. PA 포머는 1리터당 50ml, 수동 가압 포머는 1:500 비율로 희석해 작업 용액을 준비합니다.
  2. 폼 용액을 차량 전체에 고르게 도포합니다.
  3. 표면에서 제품이 마르지 않도록 합니다.
  4. 약 5분 후 물로 충분히 헹굽니다.

Also known as: ADBL Yeti Pearl, YP, ADBL YP, 에이디비엘 예티 펄

한국어로 보기

Sources

Related products

More from ADBL

More Foam products

Explore more