컷 프로
Cut Pro
ADBL Cut Pro · CP · ADBL CP · 에이디비엘 컷 프로 · ADB000647 · ADB000648
경질 클리어 코트와 아크릴 도장면의 P1000 샌딩 자국을 포함한 심한 도장 결함을 제거하는, 절삭력이 강한 전문 컷팅 컴파운드입니다. 피니싱 전 전처리나 경질 도장면의 원스텝 제품으로 쓸 수 있고 분진이 적고 작업 시간이 길며 닦아내기가 쉽습니다. 수성이며 폴리머가 없는 성분입니다.
- 브랜드
- ADBL
- 카테고리
- Exterior : Polishes
- 기본 희석 비율
- RTU
핵심 특징
- 심한 결함 제거를 위한 강한 절삭력
- P1000 샌딩 자국 제거
- 경질 도장면에 맞춤
- 경질 도장면에서 원스텝 제품으로 사용
- 저분진
- 긴 작업 시간
- 쉬운 닦아내기
- 수성, 폴리머 프리
희석 비율
- Exterior : Polishes — RTU (1:0) (기본)
사용법
- 희석 없이 바로 쓰고 사용 전 충분히 흔듭니다.
- 깨끗한 패드에 40 x 40 cm 패널당 최대 4방울을 바릅니다.
- 깨끗한 표면에서 DA 또는 회전식 머신으로 작업하고 직사광선을 피합니다.
- 연마 후 컴파운드 잔여물을 없애기 위해 도장면을 탈지합니다.
A professional cutting compound with high cut for removing severe paint defects, including P1000 sanding marks on harder clear coat and acrylic surfaces. It works as a prep step before finishing or as a one-step solution on harder paints, with low dust, a long working time, and easy wipe-off. The formula is water-based and polymer-free.
Key features
- High cut for severe defect removal
- Removes P1000 sanding marks
- Geared toward harder paint structures
- Usable as a one-step product on harder paints
- Low dust
- Long working time
- Easy wipe-off
- Water-based, polymer-free
Usage
- Use ready to use with no dilution, and shake well before use.
- Apply to a clean pad, using up to 4 drops per 40 x 40 cm panel section.
- Work it with a dual-action or rotary machine on a clean surface, away from direct sunlight.
- After polishing, degrease the paint to remove any compound residue.