Graphene Shampoo
그래핀 샴푸
Adam’s Graphene Shampoo is a highly concentrated, low-viscosity foaming shampoo that combines citrus-based degreasers with graphene ceramic resins. Formulated at a slightly alkaline pH of about 8-9, it effectively strips road contamination while helping maintain and revitalize existing graphene and ceramic coatings. Compatible with foam cannons, foam guns, and traditional bucket washing.
Adam’s Graphene Shampoo는 감귤 기반 탈지 성분과 그래핀 세라믹 수지를 결합한 고농축 저점도 폼 샴푸입니다. pH 약 8~9의 약알칼리 포뮬러로 도로 오염물을 효과적으로 제거하면서 기존 그래핀 및 세라믹 코팅의 유지 및 활성화를 돕습니다.
- Brand
- Adam's Polishes
- Categories
- Exterior : Bucket Car Shampoo, Exterior : Foam
- Primary dilution
- 1:17~1:33
- pH
- neutral (8)
Key features
- Contains graphene ceramic resins
- Maintains and revitalizes graphene and ceramic coatings
- Citrus-based degreasing agents
- pH about 8-9 for effective cleaning
- Compatible with foam cannon, gun, or bucket
Dilution
- Exterior : Foam — 1:17~1:33 (1:17-33) (primary)
- Exterior : Bucket Car Shampoo — 1:128 (1:128)
Usage
- For a foam cannon or gun: add some water to the bottle first, then about 2-3 fl oz of Graphene Shampoo, top up with water, and agitate to develop foam.
- For a two-bucket wash: fill one bucket with clean water, add about 1-2 oz of shampoo, and agitate to generate suds before adding a grit guard.
- Rinse the vehicle first to remove loose dirt, then apply the foam or dip your wash mitt and wash one panel at a time from top to bottom.
- Rinse the mitt frequently in the clean rinse bucket to avoid redepositing contamination onto the paint.
- After washing all panels, rinse the vehicle thoroughly with clean water to remove all shampoo residue.
- Dry the vehicle promptly using a clean microfiber drying towel or forced-air dryer to prevent water spotting.
- Optionally, apply a quick detail spray or spray coating as a final step to enhance gloss and reinforce protection.
- Store remaining shampoo tightly sealed in a cool, dry location away from direct sunlight.
핵심 특징
- 그래핀 세라믹 수지 함유
- 그래핀·세라믹 코팅 유지 및 활성화
- 감귤 기반 탈지 성분
- 효과적인 세정을 위한 pH 약 8~9
- 폼 캐논·폼 건·버킷 워시 호환
사용법
- 폼 캐논 또는 폼 건 사용 시: 먼저 물을 약간 채운 후 샴푸 약 2~3온스를 넣고 나머지를 물로 채워 잘 흔들어 거품을 만듭니다.
- 투 버킷 워시 사용 시: 버킷에 깨끗한 물을 채우고 샴푸 약 1~2온스를 넣어 거품을 만든 후 그릿 가드를 설치합니다.
- 먼저 차량 전체를 헹궈 느슨한 오염물을 제거한 후, 폼을 적용하거나 세차 미트를 담가 위에서 아래로 패널별로 세차합니다.
- 미트를 자주 헹굼 버킷에서 헹궈 오염물 재오염을 방지합니다.
- 모든 패널 세차 후 깨끗한 물로 샴푸 잔여물을 완전히 헹굽니다.
- 워터 스팟 방지를 위해 극세사 건조 타월 또는 에어 드라이어로 즉시 건조합니다.
- 원하는 경우 디테일 스프레이나 스프레이 코팅을 최종 마감으로 적용해 광택과 보호 효과를 높입니다.
- 남은 샴푸는 직사광선을 피해 서늘하고 건조한 곳에 밀봉 보관합니다.