Adam's UV Ceramic Spray Coating
아담스 UV 세라믹 스프레이 코팅
Adam’s UV Ceramic Spray Coating is a solvent-based sprayable ceramic with up to about 12 months of protection and patent-pending Ceramic Glow Technology for verified coverage. Its enriched gloss formula combines ease of application with the durability expected from a true ceramic coating. Suitable as a standalone coating or a booster layer on top of existing ceramic protection.
Adam’s UV Ceramic Spray Coating은 특허 출원 UV 추적 기술로 도포 상태를 실시간 확인하면서 최대 약 12개월의 보호 효과를 제공하는 스프레이형 세라믹 코팅입니다. 단독 코팅은 물론 기존 세라믹 코팅의 부스터 레이어로도 활용할 수 있습니다.
- Brand
- Adam's Polishes
- Categories
- Exterior : Coating
Key features
- Patent-pending UV tracing technology
- Extreme gloss, shine, and depth
- Up to about 12 months of protection
- Solvent-based sprayable ceramic
- Standalone or booster layer use
Usage
- Prepare the surface by using a clay bar or mitt and a swirl killer to remove contamination, oxidation, and scratches before coating.
- Wipe each panel with Surface Prep solution on a microfiber towel to degrease and ensure maximum coating adhesion.
- Shake the bottle well, then spray a fine mist of UV Ceramic Spray Coating onto the panel from about one foot away.
- Spread the product evenly with a clean microfiber towel using overlapping straight passes.
- Allow the coating to level and slightly haze, then buff off the residue with a second fresh microfiber towel.
- Use a UV light to verify full and even coverage before moving to the next panel.
- Allow the finished vehicle to cure for the recommended period before exposure to rain, washing, or other contaminants.
핵심 특징
- 특허 출원 UV 추적 기술
- 극강의 광택과 깊이감
- 최대 약 12개월 보호 효과
- 용매 기반 스프레이형 세라믹
- 단독 또는 부스터 레이어 사용 가능
사용법
- 클레이 바 또는 미트와 광택기를 사용해 오염물, 산화, 스크래치를 제거하여 코팅 전처리를 완료합니다.
- 극세사 타월에 서피스 프렙 용액을 묻혀 각 패널을 닦아 탈지하고 코팅 밀착력을 높입니다.
- 제품을 충분히 흔든 후 약 30cm 거리에서 패널에 고르게 분사합니다.
- 깨끗한 극세사 타월로 가로 방향으로 겹치며 제품을 균일하게 펴 바릅니다.
- 코팅이 약간 뿌옇게 변하면 새 극세사 타월로 잔여물을 닦아냅니다.
- UV 라이트로 도포 상태를 확인하고 다음 패널로 이동합니다.
- 작업 완료 후 권장 경화 시간 동안 비, 세차, 오염에 노출되지 않도록 합니다.