Adam's One Step Polish
아담스 원 스텝 폴리시
Adams One Step Polish uses diminishing abrasive technology to cut heavy oxidation and remove surface imperfections up to about 2000-grit sanding marks, then finishes to a brilliant gloss in a single product. It is compatible with clear coat, single-stage, lacquer, and gel coat finishes, and features a low-dust formula with extended open time for flexible working. Designed for both machine and hand application.
아담스 원 스텝 폴리시는 감소형 연마제 기술로 심한 산화와 약 2000그릿 샌딩 자국까지의 결함을 한 가지 제품으로 제거하고 찬란한 광택까지 완성합니다. 클리어코트, 싱글스테이지, 래커, 젤코트 마감에 모두 호환되며 먼지가 적고 오픈타임이 길어 작업 환경에 유연하게 대응할 수 있습니다.
- Brand
- Adam's Polishes
- Categories
- Exterior : Polishes, Exterior : Coating
- pH
- neutral (8)
Key features
- Safe on clear coat, single stage, and lacquer paint
- Compatible with various machine polishing pads
- Easy to apply and remove
- Low dust formula
- Removes up to about 2000-grit sanding scratches
- Long open time for both cutting and fine scratch correction
Usage
- Shake well and work on a cool, clean panel in the shade for best results.
- For light correction, apply about 4 drops onto a soft foam pad and spread over a roughly 2-by-2-foot section at speed 3 to 4.
- Keep the pad flat and work slowly in overlapping up-down and side-to-side passes with light pressure and about 25 percent overlap.
- Continue until the polish goes clear on the surface, then wipe residue with a premium microfiber towel and inspect.
- For medium correction, switch to an orange or blue foam pad and increase the speed to 4 to 5, adding just one or two drops per section.
- For hand application, apply a few drops onto a hex-grip applicator, work into the surface with even pressure, and remove with a microfiber towel.
핵심 특징
- 클리어코트, 싱글스테이지, 래커 도장에 안전
- 다양한 머신 폴리싱 패드와 호환
- 쉬운 도포 및 제거
- 저분진 포뮬러
- 약 2000그릿 샌딩 스크래치 제거
- 절삭 및 미세 스크래치 교정을 위한 긴 오픈 타임
사용법
- 잘 흔든 뒤 그늘의 시원하고 깨끗한 패널에서 작업합니다.
- 가벼운 교정 시 소프트 폼 패드에 약 4방울을 도포하고 속도 3~4로 약 60x60cm 구역에 펼칩니다.
- 패드를 평평하게 유지하고 약 25% 겹침으로 가벼운 압력을 주며 상하좌우로 천천히 작업합니다.
- 표면이 맑아질 때까지 작업한 후 프리미엄 마이크로파이버 타월로 잔여물을 닦고 점검합니다.
- 중간 교정 시 오렌지 또는 블루 폼 패드로 교체하고 속도를 4~5로 높이며 구역당 1~2방울만 추가합니다.
- 손 도포 시 헥스 그립 어플리케이터에 소량을 묻혀 고른 압력으로 문지른 후 마이크로파이버 타월로 닦아냅니다.