Adam's Polishes 아담스 원 스텝 폴리시 희석비 & 사용 가이드

Adams One Step Polish uses diminishing abrasive technology to cut heavy oxidation and remove surface imperfections up to about 2000-grit sanding marks, then finishes to a brilliant gloss in a single product. It is compatible with clear coat, single-stage, lacquer, and gel coat finishes, and features a low-dust formula with extended open time for flexible working. Designed for both machine and hand application.

Key features

• Safe on clear coat, single stage, and lacquer paint
• Compatible with various machine polishing pads
• Easy to apply and remove
• Low dust formula
• Removes up to about 2000-grit sanding scratches
• Long open time for both cutting and fine scratch correction

Usage

1. Shake well and work on a cool, clean panel in the shade for best results.
2. For light correction, apply about 4 drops onto a soft foam pad and spread over a roughly 2-by-2-foot section at speed 3 to 4.
3. Keep the pad flat and work slowly in overlapping up-down and side-to-side passes with light pressure and about 25 percent overlap.
4. Continue until the polish goes clear on the surface, then wipe residue with a premium microfiber towel and inspect.
5. For medium correction, switch to an orange or blue foam pad and increase the speed to 4 to 5, adding just one or two drops per section.
6. For hand application, apply a few drops onto a hex-grip applicator, work into the surface with even pressure, and remove with a microfiber towel.