Vonixx 브이20 희석비 & 사용 가이드

Vonixx 브이20 희석비 pH 스펙 카드

V20

V20은 P2000 이상의 샌딩 자국, 가벼운 스월 마크, 컷팅 단계에서 남은 흔적을 제거하기 위한 미디엄 컷 폴리시입니다. 아시아 및 소프트 클리어 코트를 대상으로 하며, 윤활 성분이 풍부한 포뮬라로 분진과 패드 막힘을 줄이면서 장시간 폴리싱을 지원합니다.

브랜드
Vonixx
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 사용 전 제품을 충분히 흔들어 줍니다.
  2. 도장 표면 전체를 깨끗이 세척합니다.
  3. 듀얼액션 폴리셔(2000~4200 OPM) 또는 로터리 폴리셔(800~1600 rpm)에 미디엄 컷 패드를 장착합니다.
  4. 50×50cm 구역을 기준으로 패드 또는 도장면에 적당량의 제품을 도포합니다.
  5. 원하는 광택이 나타날 때까지 적당한 압력으로 폴리싱합니다.
  6. 필요하면 작업을 반복하고 극세사 타월로 잔여 제품을 닦아냅니다.

V20 is a medium-cut polish made to remove sanding marks from P2000 or finer grits, light swirl marks, and leftover traces from a cutting step. It targets Asian and soft clear coats and uses a lubricant-rich formula that supports longer polishing sessions with low dust and limited pad clogging.

Key features

  • Medium-cut polish for Asian and soft clear coats
  • Removes P2000 or finer sanding marks and cutting-step residue
  • Reduces light swirl marks
  • Low-dust, low-clogging formula
  • Lubricants for extended work time

Usage

  1. Shake the product well before use.
  2. Wash the paint surface thoroughly.
  3. Attach a medium-cut pad to a dual-action polisher (2000–4200 OPM) or rotary polisher (800–1600 rpm).
  4. Apply enough product on the pad or paint to cover a 50×50 cm area.
  5. Polish with moderate pressure until the desired shine appears.
  6. Repeat if needed and wipe excess product off with a microfiber towel.

다른 이름: 보닉스, Vonix, Vonixx V20, 보닉스 브이20

View in English

출처

관련 제품

Vonixx의 다른 제품

같은 카테고리(Polishes) 제품

더 보기