레벨 2

Level 2

레벨 2는 국산차 도장의 초기 연마 단계에 사용하도록 설계된 특수 수용성 연마제입니다. 숙련된 장인이 정밀 측정 설비를 활용하여 도장을 최소한으로만 제거하도록 조정된 제품이며, 우레탄 패드로 마무리 연마에도 활용할 수 있습니다. 한 가지 연마제만 구매해야 할 경우에 권장되는 제품입니다.

브랜드
Ganbass
카테고리
Exterior : Polishes

핵심 특징

사용법

  1. 세차 후 하지 처리를 진행합니다. 연마 전 반드시 철분 제거와 실리카 스케일 제거를 완료하세요.
  2. 울, 우레탄, 파이버 등 원하는 패드에 연마제를 적량 도포하고, 도장 상태를 확인하면서 연마합니다.
  3. 연마제가 분말 형태로 끊어질 때까지 연마하는 것이 기본이나, 도장 상태에 따라 방법을 조정합니다.
  4. 연마 후 물로 연마 분말을 씻어 냅니다. 연마제가 눌어붙었거나 표면에 많이 남아 있는 경우 샴푸 세차를 진행하세요.

Level 2 is a specialized water-soluble polishing compound designed primarily for the initial correction stage on domestic Japanese car paint. It is engineered by master craftsmen using precision testing equipment to remove only the minimum necessary paint material, and can also be used as a final finishing compound when applied with a urethane pad. For buyers who want a single-product option, this compound is recommended.

Key features

  • Formulated for initial correction on domestic Japanese car paint
  • Water-soluble — no degreasing needed before coating
  • Compatible with all polisher types (single, gear, dual-action)
  • Works with wool, urethane, and fiber pads
  • Can also serve as a finishing compound when used with urethane pad
  • Resistant to smearing and burning on paint surface
  • Can be blended with WINK resin coating for one-step mirror finish

Usage

  1. After washing the car, perform surface preparation: remove iron particles and silica scale deposits before polishing.
  2. Apply an appropriate amount of compound to the pad (wool, urethane, or fiber) and polish while carefully monitoring the paint condition.
  3. Continue polishing until the compound breaks down into powder — adjust technique and timing based on paint condition.
  4. After polishing, wash off compound residue with water; use shampoo if compound has burned or is heavily remaining on the surface.

다른 이름: 간바스, ganbas, Ganbass Level 2, 간바스 레벨 2, 레벨2, レベル2水溶性研磨剤

View in English

출처