Vanguard 이노가닉 크리스탈 코팅 포 글래스 사용 가이드

A high-silicon inorganic crystal coating for glass that cures into a hard, glossy, and strongly water-repellent layer, and can also serve as a maintenance top-up for the brand's SiO2 fluoro crystal coating. It is built for durability and can be layered with matching paint and plastic coatings from the same range.

Key features

• High inorganic silicon content
• High hardness and gloss
• Strong water repellency
• Doubles as coating maintenance top-up
• Layerable with matching paint/plastic coatings

Usage

1. Wash the car thoroughly.
2. Remove tar and other embedded stains with a stain remover.
3. Use a brake dust remover and clay to strip remaining residue and dust particles.
4. Polish the glass, working from a coarser to a finer compound to prepare the surface.
5. Wipe down with a degreaser to remove polishing residue before coating.
6. Place a few drops of coating on the applicator sponge and wipe it over roughly a 40x40cm section, first horizontally then vertically.
7. Note the time it takes for the coating to show resistance when wiped with a towel, then use that same timing to coat the rest of the glass.
8. Check the treated glass for any uncured coating residue.
9. Let the vehicle sit indoors for at least 2-3 hours without water contact or touching the surface before returning it.