Vanguard 이노가닉 크리스탈 코팅 포 카 페인트 사용 가이드

A high-silicon inorganic crystal coating for car paint that cures into a hard, glossy, and highly water-repellent protective layer. It is built for lasting durability and can be paired with matching glass and plastic coatings from the same range for a thicker combined film.

Key features

• High inorganic silicon content
• High hardness and gloss
• Strong water repellency
• Long-lasting stability
• Layerable with matching glass/plastic coatings

Usage

1. Wash the car thoroughly.
2. Remove tar and other embedded stains with a stain remover.
3. Use a brake dust remover and clay to strip remaining residue and dust particles.
4. Polish the paint, working from a coarser to a finer compound to prepare the surface.
5. Wipe down with a degreaser to remove polishing residue before coating.
6. Place a few drops of coating on the applicator sponge and wipe it over roughly a 40x40cm section, first horizontally then vertically.
7. Note the time it takes for the coating to show resistance when wiped with a towel, then use that same timing to coat the rest of the car from front to back and top to bottom.
8. Check the entire car for any uncured coating residue.
9. Let the vehicle sit indoors for at least 2-3 hours without water contact or touching the surface before returning it.