Find Your Detail · 제품 카탈로그 · 브랜드 · 실사용 영상 · 소개

ValetPRO 스노우 씰 - Si02 프로텍션 희석비 & 사용 가이드

ValetPRO 스노우 씰 - Si02 프로텍션 희석비 pH 스펙 카드

Snow Seal - Si02 Protection

발렛프로 스노우 씰은 폼랜스와 압력 세척기로 도포하도록 설계된 SiO2 스프레이 실란트입니다. 발수 보호막을 형성해 비딩이 잘 잡히고 도장의 광택을 살려줍니다. 깨끗한 차량에 지정 희석비로 도포해 헹군 뒤 건조하기만 하면 되며 별도의 양생 시간이 필요 없습니다.

브랜드
ValetPRO
카테고리
Exterior : Coating, Exterior : Quick Detailer, Exterior : Foam
기본 희석 비율
1:5
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-08-16

작용 방식

  • 아미노 개질 실리콘 — 표면에 더 강하게 붙어 지속력이 높은 실리콘입니다.
  • 세정 계면활성제 — 때를 들어올려 물에 분산시키는 성분입니다.
  • 비이온 계면활성제 — 이 제품에 쓰인 계면활성제의 이온 유형입니다.

공개 성분

성분CAS역할
2-butoxyethanol; ethylene glycol monobutyl ether111-76-2용제
Siloxanes and silicones, 3-[(2-aminoethyl)amino]propyl Me, di-Me71750-79-3피막 형성제
Isotridecanol ethoxylated9043-30-5비이온 계면활성제
Alcohols, C9-11, ethoxylated68439-46-3비이온 계면활성제
Acetic acid64-19-7산성 주성분
octamethylcyclotetrasiloxane; [D4]556-67-2실리콘 캐리어
CYCLOPENTASILOXANE541-02-6실리콘 캐리어
Dodecamethylcyclohexasiloxane540-97-6실리콘 캐리어
1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-32634-33-5보존제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 폼랜스용 SiO2 스프레이 실란트
  • 발수 비딩 효과
  • 도장의 광택 향상
  • 도포·헹굼·건조만으로 완료되는 간편한 작업 흐름
  • 별도의 양생 시간 불필요

희석 비율

용도희석비율
Exterior : Foam (기본)1:51:5

사용법

  1. 직사광선을 피한 곳에서 깨끗하고 손에 차갑게 느껴지는 차량 상태로 작업합니다.
  2. 깨끗한 폼랜스 보틀에 제품 50ml와 물 250ml를 섞어 희석합니다.
  3. 윈드스크린에 닿지 않도록 주의하며 차량에 폼을 도포합니다.
  4. 제품이 도장에서 마르기 전에 압력 세척기로 헹궈냅니다.
  5. 발렛프로 드라잉 타올로 차량을 건조합니다.
  6. 얼룩 방지를 위해 마무리로 글래스 클리너로 윈드스크린과 와이퍼 블레이드를 닦아줍니다.

ValetPRO Snow Seal is an SiO2 spray sealant designed to be applied through a foam lance and pressure washer. It leaves a hydrophobic layer that beads water well and lifts gloss on the paint. Application is simple: foam onto a clean vehicle at the listed dilution, rinse off, then dry, with no cure time needed.

Key features

  • SiO2 spray sealant for foam lance use
  • Hydrophobic water beading
  • Adds gloss to the paint
  • Simple foam, rinse and dry workflow
  • No cure time needed

Usage

  1. Work out of direct sunlight on a clean vehicle that is cool to the touch.
  2. In a clean foam lance bottle mix 50ml of product with 250ml of water.
  3. Foam the vehicle, taking care to avoid the windscreen.
  4. Rinse off with a pressure washer before the product can dry on the paint.
  5. Dry the vehicle with a ValetPRO drying towel.
  6. Clean the windscreen and wiper blades with glass cleaner afterwards to avoid smearing.

다른 이름: 발렛, 발렛프로, Snow Seal, Snow Seal SiO2, ValetPRO Snow Seal, VP Snow Seal, Snow Seal Si02 Protection, WP33, 스노우 씰, 스노우 씰 SiO2, 발렛프로 스노우 씰, 스노우 씰 Si02 프로텍션, 스노우씰 SiO2 코팅

View in English

출처

  • ValetPRO 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

ValetPRO의 다른 제품

  • Ultra Soft Chemical Resistant Brush Small
  • Leather Cleaning Brush
  • Drop Top Protector 500ml – Convertible Hood & Soft Top Fabric Protector
  • Bug Remover 500ml
  • Classic Tyre Dressing 500ml
  • Matt Protect 500ml

같은 카테고리(Coating) 제품

  • Fireball Grace
  • Armour Detail Supply PHOBIC - Spray Coating
  • McKee's 37 365 Ceramic Spray Coating
  • Menzerna Power Lock Ultimate Protection
  • Garage Therapy Cerberus V2 Ceramic Coating
  • Shelby Ultimate Super Snake Ceramic Wax

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)