SWAG 세라믹 리로더 V.1 희석비 & 사용 가이드

SWAG 세라믹 리로더 V.1 희석비 pH 스펙 카드

CERAMIC RELOADER V.1

Swag 세라믹 코팅을 되살리고 보호 기간 동안 상태를 유지하도록 만든 세라믹 스프레이 탑코트입니다. 일반 세차 과정에서 도장면과 휠, 유리에 바로 올리는 단독 보호제로도 사용할 수 있습니다. 남는 피막은 발수성을 가지며 도장면에 깊이감을 더해 줍니다.

브랜드
SWAG
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-08-01

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 건조하고 서늘하며 유분 없는 표면에서 시작하고 용기를 흔듭니다.
  2. 폼 어플리케이터나 마이크로파이버에 소량을 덜어 냅니다.
  3. 패널 전체에 균일하게 펴 바릅니다.
  4. 결합되도록 2분간 기다립니다.
  5. 밀도 높은 마이크로파이버로 닦아 내고, 뻑뻑하면 새 타월로 교체합니다.

A ceramic spray topper made to refresh Swag ceramic coatings and hold them in condition through their protection period. It also stands on its own as a quick protective layer applied during a normal wash, covering paint, wheels and glass. The film it leaves is water-repellent and adds depth to the paint.

Key features

  • Refreshes existing ceramic coatings
  • Usable as a standalone protective layer
  • Water-repellent finish
  • Works on paint, wheels and glass
  • Quick to apply during regular washing
  • Enhances paint depth

Usage

  1. Start with a dry, cool, grease-free surface and shake the bottle.
  2. Dose a small amount onto a foam applicator or a microfiber cloth.
  3. Spread the product evenly over the whole panel.
  4. Wait 2 minutes for the layer to bond.
  5. Buff the panel with a high-density microfiber cloth, switching to a fresh cloth if it drags.

다른 이름: 스웨그, 스웩, Swag CERAMIC RELOADER V.1, SCR V.1, Swag SCR V.1, 스웨그 세라믹 리로더 V.1

View in English

출처

관련 제품

SWAG의 다른 제품

같은 카테고리(Coating) 제품

더 보기